RAK Ceramics Petit Round Concealed Thermostatic Valve - Brushed Gold

The RAK Ceramics Petit Round Concealed Thermostatic Valve requires a minimum water pressure of 1.0 Bar to operate effectively.

This valve is designed for a single shower outlet only. It cannot be used to control a bath filler.

Clean the brushed gold finish gently with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, which can damage the surface.

The RAK Ceramics Petit Round Concealed Thermostatic Valve is supplied with a 15-year guarantee from the manufacturer.

No, this valve requires a minimum pressure of 1.0 Bar. It is not suitable for very low-pressure systems without a booster pump.

The valve features a thermostatic control mechanism that allows you to set and maintain your desired shower temperature consistently.

As a concealed valve, professional installation by a qualified plumber is strongly recommended to ensure correct and safe fitting within the wall.

Check that the water supply is turned on. Ensure the water pressure meets the minimum 1.0 Bar requirement. Verify that the valve is correctly installed and not obstructed. Consult a plumber if pressure is adequate but flow is still low.

Confirm the water pressure is consistently above 1.0 Bar. Ensure the thermostatic cartridge is not blocked or damaged (this may require professional servicing). Check for any simultaneous use of other water outlets in the property that might affect pressure.

The valve may not be seated correctly, or seals may be compromised. This typically requires professional inspection and potential resealing or replacement of parts by a qualified plumber.

The handle mechanism might be stiff due to residue or requires lubrication. If the issue persists or the handle is very difficult to turn, contact a professional plumber for assessment.