Milan Atomiser - White

It is recommended to empty and wipe the tank daily after use. A more thorough cleaning with mild soap and water should be performed weekly to maintain optimal performance and prevent residue buildup.

Clean tap water is recommended. Avoid using distilled or purified water, as it may affect mist output. Ensure the water is at room temperature.

Only use 100% pure, natural essential oils. Avoid synthetic fragrance oils, perfumes, or carrier oils that are not pure essential oils, as they can clog the atomiser and damage the unit.

With a 120 ml tank capacity, the atomiser can typically run for several hours. The exact duration depends on the mist output setting (if applicable) and ambient conditions.

No, the atomiser comes with a USB cable and can be plugged into any standard USB power source, such as a computer, power bank, or a common USB wall adapter (often used for phone chargers). The adapter itself is not included with the product.

Yes, you can use the LED light independently of the mist function. You can also choose to turn off the light while the mist is running.

The atomiser measures 19 cm in height and 9 cm in diameter, with a weight of 167 g.

Ensure the water level is above the minimum line. Check that the cover is properly sealed. Verify the USB connection and power source are active. Clean the ultrasonic disc if there is visible buildup.

The water level might be too low, or the ultrasonic disc may need cleaning. Ensure no part of the mist outlet is obstructed.

Check the USB connection. Try a different USB port or power adapter. If the issue persists, try cycling through the light settings again by pressing the button.

This is likely due to the automatic shut-off function activating because the water level is low. Refill the tank.

Ensure the outer cover is securely in place and that the atomiser is not tilted or overturned. Check that the water level has not exceeded the maximum fill line.