Best current price£190.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£190.00Visit shop B&Q - Quarter Landing 6M Handrail KitMatt WhiteEdstone90 Degree TurnCuts To Size5Yr Guarantee
Visit shop1 offer from £190.00
View price history by clicking the chart icon.
The Handrails Direct Edstone Quarter Landing Handrail Kit is designed for homeowners and contractors seeking a durable, minimalist safety solution for staircases featuring a 90-degree turn. Providing a seamless, clean matt white aesthetic, this system offers high versatility through its adjustable components, though users should note that final fitting requires careful measurement and cutting to match specific floor-to-floor heights up to 2800mm.
| Colour | White |
|---|---|
| Brand | Handrails Direct |
No, this specific kit is designed for a 90-degree quarter turn.
The system is compatible with 40mm Edstone handrail components.
No, this system is intended for straight runs that incorporate a 90-degree landing or turn.
Yes, the matt white finish is durable and designed for regular residential use.
A standard fine-toothed hacksaw is sufficient to cut the rails and poles to size.
Yes, the kit components can be configured to accommodate either orientation.
Ensure all mounting brackets are securely tightened and that wall anchors are appropriate for your specific wall material (e.g., masonry vs. stud).
Loosen the adjustment bolts on the elbow connectors slightly to reposition the angle, then re-tighten once the alignment matches the staircase pitch.
Always use a high-quality, fine-toothed hacksaw and apply painter's tape over the cut line before sawing to maintain a clean edge.
Installation requires standard hand tools, including a measuring tape, level, and a fine-toothed hacksaw for trimming components. Before beginning, ensure your floor-to-floor height does not exceed 2800mm. When cutting the rails, wrap the area in masking tape to prevent the finish from chipping. Compatibility is limited to the 40mm Edstone handrail line; do not attempt to mix these components with non-Edstone systems as diameters may vary. For routine care, simply wipe down the matt white finish with a soft, damp cloth and mild soap; avoid abrasive chemicals that could damage the coating.
