Best current price£33.85from B&Q
Shopping.co.uk recommended and popular offers
B&Q£33.85Visit shop B&Q - Ultra Primer For Exterior Wood,fencesSheds & Cladding1L Granite K499
Visit shop12 offers from £33.85 - £101.72
View price history by clicking the chart icon.
The Tikkurila Ultra Primer is a high-performance, water-based exterior wood primer designed for harsh climates, offering a durable foundation for outdoor wood protection. It penetrates and seals timber, enhancing adhesion and preventing moisture ingress, while its breathable and flexible formula minimizes cracking and peeling. While it provides excellent long-term protection when used with Tikkurila topcoats, its full benefits are realized within the Tikkurila exterior system.
| Model Part Number | Y498 |
|---|---|
| Brand | Tikkurila |
Tikkurila Ultra Primer is suitable for all types of new or previously treated exterior wood, including fences, sheds, cladding, doors, and windows.
You can apply Tikkurila Ultra Primer by brush, roller, or spray. Ensure you apply it evenly to a clean, dry surface.
For maximum durability and weather protection, always use Tikkurila Ultra Primer before applying your chosen Tikkurila exterior topcoat, such as Valtti Opaque.
The primer is designed for harsh climates and extreme weather. However, application should ideally be done when temperatures are between 5°C and 30°C and the surface is not too hot or cold to the touch.
While Ultra Primer can be used with other exterior topcoats, its performance benefits, particularly extended durability, are optimized when used as part of a complete Tikkurila exterior system.
Drying times can vary depending on conditions. Typically, it is touch-dry within a few hours, and recoating can occur after 12-24 hours, but always refer to the specific product data sheet for precise timings.
Yes, Tikkurila Ultra Primer has a low-VOC formulation, making it a more environmentally conscious choice for exterior wood protection.
Ensure the wood surface was properly cleaned, dried, and free from contaminants like dust or grease before application. If the surface was previously painted or treated, ensure all loose material was removed and the surface was adequately prepared (e.g., lightly sanded).
Apply the primer with even strokes, avoiding overworking the product. Ensure consistent application thickness. If using a roller, use a suitable nap. If spraying, maintain consistent distance and speed. Ensure the temperature is within the recommended application range.
This can indicate moisture trapped within the wood or insufficient surface preparation. Ensure the wood was completely dry before application and that adequate ventilation was provided during drying. Check that the primer was applied to a clean surface and that the topcoat was applied within the recommended recoating window.
Check the ambient temperature during application. If it's too cold, the product may thicken. If it's very warm, it might thin slightly. Avoid adding water unless specifically instructed by Tikkurila for cleaning purposes. Ensure the product has been stirred thoroughly.
Preparation: Ensure the exterior wood surface is clean, dry, and free from dust, grease, and loose material. Remove any existing flaking paint or old treatments. For previously treated surfaces, a light sanding may be required. For new or bare wood, ensure it is properly prepared according to Tikkurila's recommendations.
Application: Apply Tikkurila Ultra Primer using a brush, roller, or spray. Ensure even application. For best results and maximum protection, apply one coat of primer. Allow adequate drying time before applying the topcoat.
Compatibility: This primer is designed to be used as the first step in a Tikkurila exterior woodcare system. It is recommended to use Tikkurila exterior topcoats, such as Valtti Opaque, for optimal performance and durability. It can be used on new or previously treated exterior wood surfaces, including fences, sheds, cladding, doors, and windows.
Care: Store the primer in its original container in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the container tightly sealed when not in use. Clean application tools immediately after use with water.
