Best current price£125.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£125.95Visit shop B&Q - Complete 12V Winch Control Box System For Up To 20,000Lb. Remote.
Visit shop4 offers from £125.95 - £135.95
View price history by clicking the chart icon.
This WINCHMAX Complete 12v Winch Control Box System is designed for users with 12v winches up to 6.8hp/20,000lb, offering a comprehensive solution for upgrading or replacing existing control boxes. Its key benefit is providing a robust and reliable wireless control system. A crucial consideration is the requirement for the winch motor to be properly earthed directly to the battery negative with a minimum 25mm² cable, as the kit does not include an earth cable.
| Brand | WINCHMAX |
|---|
No, this control box is specifically designed for 12-volt electrical systems only. It will not function correctly with 24v systems.
You must use a good quality minimum 25mm² cable for the earth connection, running directly from the winch motor to the battery negative terminal.
No, the kit does not include an earth cable. You will need to source and install this yourself according to the specifications.
This control box system is rated for winches up to 20,000lb. Using it with a winch exceeding this rating is not recommended and may lead to failure or damage.
Refer to your winch motor's manual for specific terminal identification (e.g., M1, M2). Generally, reversing the main power leads to the motor will reverse the direction of operation. Always disconnect the battery before making electrical connections.
The effective range depends on environmental factors, but typically provides ample working distance for safe operation during winching tasks. Avoid significant obstructions between the remote and the receiver.
Check battery levels in the remote. Ensure the wireless receiver is properly connected to the control box and has power. Verify that the control box is correctly wired to the winch and the vehicle's 12v power source. Ensure the earth cable is securely connected directly to the battery negative.
This often indicates an inadequate earth connection. Verify that the earth cable is a minimum 25mm² and runs directly from the winch motor to the battery negative terminal without any intermediate connections. Check for corrosion at both ends of the earth cable.
Ensure the winch is not being overloaded beyond its 20,000lb rating. Check for any binding or obstructions in the winch line or fairlead. Confirm the electrical connections are clean and tight to minimize resistance.
Ensure there are no large metal objects or other electronic devices interfering with the wireless signal. Check the antenna connection on the receiver. Replace the battery in the remote if it is low.
Compatibility: This control box is designed exclusively for 12-volt electrical systems and winches rated up to 6.8hp / 20,000lb. Ensure your vehicle's electrical system is 12v. Crucially, your winch motor must be properly earthed with a good quality minimum 25mm² cable directly back to the vehicle's battery negative terminal. This kit does not include an earth cable.
Setup:
Care:
