Best current price£18.70from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£18.70Visit shop Q Max Sheet Metal Punch 21Mm Anti-Corrosive Surface Finish 5052587027241
Visit shop
The Range£18.98Visit shop Q.max Sheet Metal Punch 19Mm - Grey
Visit shop36 offers from £18.70 - £147.76
View price history by clicking the chart icon.
The Q.Max 37.5mm Sheet Metal Punch is an essential tool for electricians, HVAC technicians, and metalworkers who require clean, precise holes in sheet metal up to 16 gauge. It is engineered to provide even load distribution and burr-free edges, eliminating the need for post-cut filing or finishing; however, users should note that the punch is sold as a standalone unit and requires a compatible wrench for operation.
| Model Part Number | 37.5Mm |
|---|---|
| Brand | Q.Max |
This punch is rated for sheet metal up to 16 gauge.
No, the punch is sold as a single unit without the key or wrench.
No, the punch is designed to create burr-free holes, so secondary finishing is typically not required.
A 10mm hexagonal wrench is required for this specific punch.
Clean the cutting edges after use and keep the threads lightly oiled to prevent rust and binding.
Yes, for cutters 15mm and larger, including the 37.5mm version, the thread is integrated into the punch.
Verify that the pilot hole is correctly aligned and apply a small amount of lubricant to the bolt threads.
Inspect the cutting edge for damage or material buildup and ensure the punch is fully seated before tightening.
To operate the Q.Max 37.5mm punch, you will need a 10mm hexagonal wrench (MC type). Because the thread is integrated into this 37.5mm unit, setup is straightforward. First, drill a pilot hole into the sheet metal to accommodate the punch bolt. Insert the punch through the pilot hole, secure it with the integrated thread, and rotate the hexagonal bolt to pull the punch through the metal. Always keep the cutting surfaces clean and free of debris after use. Applying a light machine oil to the threads periodically will ensure smooth operation and prevent the threads from seizing over time.
