Best current price£127.33from eBay
Shopping.co.uk recommended and popular offers
eBay£127.33Visit shop LASER 9183 Ball Joint Mounting Spreader Removal Separator Black Steel Tool
Visit shop3 offers from £127.33
View price history by clicking the chart icon.
This 11-piece Laser Tools Ball Joint Separator set (MPN 9183) is designed for professional mechanics and serious DIYers who need to efficiently separate ball joints. Its primary benefit is the time-saving advantage over traditional methods when used with an air impact hammer. A caveat is the requirement for an air impact hammer, which is not included. The set includes a range of common thread sizes for ball joint adaptors, two air hammer punches, an alignment punch, and a domed adaptor, all organized in a durable EVA foam tray.
| Model Part Number | 9183 |
|---|---|
| Brand | Laser |
The set is designed to work with standard 1/2" drive air impact hammers. Ensure your hammer has adequate power for the task.
Yes, the adaptors can be used with a standard mechanic's hammer by striking the rear of the impact hammer shaft where the adaptor is attached.
The adaptors are threaded and designed to fit specific metric ball joint stud thread sizes. Consult your vehicle's service manual or measure the existing ball joint stud thread if unsure.
The domed adaptor is used for controlled off-line separation, providing a more focused application of force.
No, the air impact hammer is not included with this set. It is a separate tool required for pneumatic operation.
The EVA foam tray measures approximately 37mm (height) x 186mm (width) x 197mm (depth).
This set is specifically designed for ball joints. Tie rod ends typically require different types of separators.
Ensure the correct adaptor size is used. Verify the air impact hammer is functioning correctly and delivering sufficient force. Check that the adaptor is seated properly against the ball joint stud. Try applying penetrating oil around the joint and allow it to soak.
Confirm the 17mm hex punch is correctly aligned with the impact gun. Ensure the adaptor's jaw is firmly gripping the ball joint housing. The ball joint may be severely damaged or corroded, requiring additional manual preparation.
Check for proper alignment using the hex punch. Ensure the impact hammer's anvil is securely connected to the adaptor.
Setup: To use with an air impact hammer, select the appropriate ball joint thread adaptor for the vehicle's ball joint. Attach the adaptor to the air hammer. Use the 17mm hex punch to align the impact gun's drive shaft with the adaptor. Ensure a secure connection. For manual use, select the adaptor and thread it onto the impact hammer shaft, then use a hammer to strike the rear of the tool.
Compatibility: This set is primarily designed for vehicles with standard ball joint designs that can accommodate the included adaptor thread sizes (M10 to M16 metric threads). It requires an air impact hammer (typically 1/2" drive) or a standard mechanic's hammer.
Care: After use, clean any grease or debris from the adaptors and punches with a clean cloth. Store all components back in their designated slots in the EVA foam tray to prevent loss and damage. Avoid exposing the tools to excessive moisture or corrosive materials. Periodically check the condition of the adaptors for any signs of wear or damage.
