CORSAIR RMe Series RM750e - 750W - ATX 3.1 PCIe 5.1

A fully modular power supply means all cables can be detached from the PSU. This allows you to connect only the necessary cables for your build, reducing clutter, improving airflow, and making installation and cable management much easier.

Yes, the CORSAIR RM750e is ATX 3.1 and PCIe 5.1 compliant and includes a dedicated 12V-2x6 (12+4 pin) power cable. This ensures full compatibility and stable power delivery for modern high-performance graphics cards, including the NVIDIA RTX 40 series, as long as your total system wattage remains within the 750W limit.

Zero RPM Fan Mode allows the PSU fan to completely stop when the power supply is under low to medium loads. This results in silent operation. The fan will automatically spin up when the load or internal temperature increases to maintain optimal cooling, and then stop again when conditions allow.

The CORSAIR RMe Series RM750e comes with a seven-year warranty, covering defects in material and workmanship under normal use.

No, it is critically important to only use the modular cables that came specifically with your CORSAIR RMe Series RM750e power supply, or officially compatible CORSAIR cables purchased separately and verified for this model. Pinouts can vary between PSU models and brands, and using incompatible cables can severely damage your components.

Cybenetics Gold is an independent certification indicating a high level of power efficiency. It means the PSU converts a high percentage of AC power from your wall outlet into usable DC power for your PC, with less energy wasted as heat. This results in lower electricity bills, cooler operation, and a longer lifespan for the PSU.

To clean the PSU, first ensure your PC is powered off and unplugged from the wall. Then, use a can of compressed air to gently blow dust out of the fan grille and ventilation openings. It's recommended to hold the fan blades gently to prevent them from spinning too fast during cleaning, which can damage the bearings.

1. Ensure the PSU's main power switch on the back is set to 'ON' (I). 2. Check that the AC power cord is securely plugged into both the PSU and the wall outlet. 3. Verify that the 24-pin ATX motherboard cable and the CPU power cable (4+4-pin or 8-pin) are firmly seated in their respective ports on the motherboard and PSU. 4. Confirm the case's power button cables are correctly connected to the motherboard.

The RM750e features a 'Zero RPM Fan Mode'. The fan is designed to remain off under low to medium loads for silent operation. It will only spin up when the PSU reaches a certain temperature or load threshold. This is normal behavior. If the fan never spins up even under heavy load (e.g., gaming), check that the fan cable (internal to the PSU) is not obstructed and the PSU is getting adequate ventilation. If the issue persists, contact CORSAIR support.

1. Ensure all power cables, especially the GPU and CPU power cables, are securely connected at both the PSU and component ends. 2. Verify that your system's total power draw (especially during peak loads) does not exceed the RM750e's 750W capacity. Use an online PSU calculator to estimate your system's needs. 3. Check that your wall outlet or surge protector is functioning correctly and not overloaded.

NEVER mix PSU cables from different brands or even different models within the same brand unless explicitly stated as compatible by the manufacturer. Pinouts can vary, potentially causing severe damage to your components. Always use only the cables provided with your CORSAIR RMe Series RM750e PSU.

1. Double-check that the correct modular cable for that component is used and fully seated in both the PSU's output port and the component's input port. 2. For GPUs, ensure you are using the dedicated 12V-2x6 cable if required, or the appropriate 6+2 pin PCIe cables. 3. Verify that the component itself is functional by testing it in another system if possible.