Laser Diesel Injector Bore & Sleeve Cleaning Kit - 3pc

This kit is designed for general diesel injector bore and seat cleaning. It is suitable for most common diesel injector designs, but always consult your vehicle's service manual for specific recommendations.

It is recommended to use these brushes whenever diesel injectors are removed for service, inspection, or replacement to ensure a clean mating surface.

This kit is specifically designed for diesel injectors. Gasoline injector cleaning often requires different tools and procedures due to different fuel system pressures and component designs.

The brush bristles are made of stainless steel, offering durability and resistance to corrosion.

After use, remove debris with compressed air or a pick. You can wash them with soap and water and ensure they are thoroughly dried before storage to prevent rust on the shafts.

This kit is sold as a set. Individual replacement brushes are typically not offered; if a brush is damaged beyond use, the entire kit may need to be replaced.

The Long Spiral Tube Brush has an overall length of 290mm.

This can occur with excessive force. Straighten gently if possible, or use a replacement brush from the kit. Avoid twisting the brush excessively in the bore.

Utilize the Long Spiral Tube Brush, which is specifically designed for greater reach. Ensure no obstructions are present in the bore.

Apply a diesel-specific injector cleaner or carbon remover to the area, let it soak according to the cleaner's instructions, and then re-brush. Follow up with a clean cloth.

Ensure brushes are thoroughly dried after cleaning and stored in a dry environment. Light surface rust can be gently scrubbed away with a wire brush, but significant corrosion may indicate the need for replacement.