Snowdon Timber Factory Reject Unbanded Scaffold Board - 975mm x 225mm x 36mm

These unbanded scaffold boards have been designated as factory rejects due to a range of defects t...

Best current price£43.95from B&Q

All Offers

28 offers from £43.95 - £148.99

View price history by clicking the chart icon.

B&QB&Q - Reject Unbanded Scaffold Board (T) 36mm (W) 225mm (L) 975mm
Free delivery in 1–3 days
£43.95
Visit shop
The RangeSnowdon Timber Reject Unbanded Scaffold Board (T) 36Mm (W) 225Mm (L) 975Mm - Pack Of 2 - Natural / 1
Free delivery in 1–3 days
£43.95
Visit shop
HomebaseSnowdon Timber Unbanded Scaffold Board 975 X 225 X 36Mm 4 Pack
Free delivery in 1–3 days
£69.00
Visit shop
wilkoSnowdon Timber Scaffold Board - Unbanded - 975 x 225 x 36mm - 4 Pack
Free delivery in 1–3 days
£69.00
Visit shop
Robert DyasSnowdon Timber Factory Reject SB362253 Scaffold Board - 36 x 225 x 975mm - Cream - Unbanded - Untreated Softwood
£2.95 delivery
£79.99
Visit shop

Product Information

Full details

This product is designed for DIY enthusiasts, crafters, and builders looking for low-cost timber for non-structural projects. The key benefit is the affordability of these boards, which provide a rustic aesthetic perfect for shelving, furniture, or garden landscaping. A critical caveat is that these boards are factory rejects and must not be used for professional scaffolding or any application where structural load-bearing capacity is required, as they contain defects that compromise their safety ratings.

All features

Model Part Number1421860
BrandSnowdon Timber Products Ltd

Extended Product Information

FAQs

Can I use these for a scaffold platform?

No. These are factory rejects and are explicitly unsafe for any structural scaffolding use.

What does 'blue stain' mean for my project?

Blue stain is a cosmetic fungal discoloration. It does not typically affect the strength of the board but may be visually unappealing if you prefer a natural, uniform wood look.

Are these boards heat-treated?

As they are industrial construction rejects, they may or may not have standard industry markings. It is best to treat them as raw timber.

Can I use these for outdoor garden furniture?

Yes, but you must apply a high-quality, weather-resistant exterior stain or sealant to protect the wood against rot and moisture.

How do I deal with the cracks in the wood?

Small cracks can be filled with wood filler or, if you prefer the rustic look, they can be left as-is, provided they do not compromise the structural stability of the piece you are building.

Troubleshooting

Board is uneven or wobbles

Use a planer or a belt sander to level the surface, or adjust your project design to accommodate minor thickness variations.

Wood splits during cutting

Drill pilot holes before screwing into the board and use masking tape over the cut line to prevent splintering.

Pros and Cons

Pros

  • Highly cost-effective compared to grade-A timber
  • Excellent for upcycling and decorative home projects
  • Sturdy 36mm thickness provides a solid feel for furniture
  • Standardized dimensions make them easy to work with in modular designs

Cons

  • Not suitable for load-bearing or safety-critical construction
  • May contain blue stain or discoloration marks
  • Possibility of internal stresses or surface splits and cracks
  • Requires careful inspection and potential surface preparation before use

Setup, Compatibility & Care

When working with factory reject timber, your first step should be a thorough visual inspection to identify the location of any splits or cracks. If you intend to use the boards for furniture, plan your cuts to avoid the most damaged areas.

  • Sanding: Given the raw nature of these boards, they will require significant sanding with a belt sander to remove splinters and smooth out rough areas before applying any finish.
  • Sealing: Apply a high-quality varnish, oil, or wax to protect the wood from internal stresses and environmental changes.
  • Cutting: Use sharp blades to accommodate the thickness; since this is softwood, ensure your saw blade is clean to prevent burning the timber.
  • Storage: Keep the boards in a cool, dry area off the ground to prevent warping or additional moisture damage before your project begins.

Similar items

Price History

DatePrice
Visit shop