Door Strip Threshold Transition Strip 40mm - Oak
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The TMW Profiles Door Strip Threshold Transition Strip is an ideal solution for homeowners and DIY enthusiasts looking to create a seamless, professional finish between varying floor surfaces like carpet, parquet, and tile. Measuring 40mm in width and 0.9m in length, this transition strip effectively covers gaps and minor height differences while maintaining a clean aesthetic; however, users should ensure the gap width is compatible with the 40mm coverage before installation.
All features
| Model Part Number | TMW |
|---|---|
| Brand | TMW Profiles |
Extended Product Information
FAQs
Can this strip be used on stairs?
This product is designed specifically for flat threshold transitions between rooms and is not recommended for stair nosing applications.
Is the strip suitable for uneven height floors?
It is designed to bridge level differences, but it is best suited for small gaps or minor height variations rather than significant step-downs.
What tools are needed for installation?
You will need a drill, a screwdriver (or drill driver), a tape measure, and potentially a hacksaw for trimming.
Can this be used with underfloor heating?
Yes, provided you are careful not to drill into heating elements during the installation of the screw plugs.
Is the finish resistant to moisture?
The surface is durable, but it should be kept dry. It is not intended for use in high-moisture environments like shower rooms.
Troubleshooting
The strip feels loose after installation.
Ensure the screw plugs are fully seated in the sub-floor and the screws are tightened completely.
The strip is longer than the doorway width.
Use a standard hacksaw to trim the metal strip to the required length before fixing.
Pros and Cons
Pros
- Clean, professional aesthetic
- Scratch-resistant wood effect surface
- Comprehensive installation kit included
- Effective at bridging uneven floor transitions
- Sturdy construction for high-traffic areas
Cons
- Fixed length of 0.9m may require cutting for non-standard doorways
- Requires drilling for screw-in installation
- Limited to a 40mm coverage width
Setup, Compatibility & Care
Installation Steps:
- Measure the width of your doorway and cut the strip to size using a hacksaw if necessary.
- Position the strip over the transition gap and mark the locations for the drill holes.
- Drill pilot holes into your sub-floor using a masonry or wood bit depending on your surface.
- Insert the provided plugs into the holes.
- Secure the strip using the included screws, ensuring they are tightened flush with the surface.
Compatibility: Compatible with most standard interior floorings including carpet, vinyl, parquet, and laminate.
Care: To maintain the wood effect finish, clean regularly with a soft, damp cloth. Avoid harsh chemical cleaners or abrasive scouring pads that may dull the protective surface coating.