Makita 130mm PH2 Bit - 5 Pack - Makita

PH2 refers to the Phillips head size, which is a standard screw head type commonly used in drywall installation.

These bits are compatible with Makita models DFS452, DFS250, FS6300, FS6300R, FS6200, FS4200, FS4200A, FS2300, FS2200, and FS4300 when used with the Makita 199146-8 Autofeed Collated Attachment.

The lifespan of the bits depends on usage and the materials being used. Regular inspection and replacement when worn are recommended.

While these bits can be used with impact drivers, they are designed specifically for drywall screws and autofeed screwdrivers. Using them with impact drivers may not provide the best performance.

If the bit gets stuck, try reversing the screwdriver slowly while applying pressure. If that doesn't work, carefully use pliers to remove the bit.

Use a brush or a cloth to remove drywall dust and debris after each use. Avoid using abrasive cleaners that could damage the bit's surface.

No, these bits are not magnetic. You may need to use screws that stay in place easily.

Check that the bit is fully engaged in the screw head. Reduce the torque setting on the screwdriver. Replace the bit if worn.

Ensure the bit holder is clean and free of debris. Use a bit holder lubricant. Check the bit for damage.

Check the autofeed mechanism for obstructions or damage. Ensure the screws are compatible with the autofeed system. Inspect the bit for damage or wear.