Shopping.co.uk

Hensel ENYCASE Surface mounted Wall/Ceiling Box - DK 3525 S

Hensel ENYCASE Surface mounted Wall/Ceiling Box - DK 3525 S

This Hensel ENYCASE surface mount box is designed for wall or ceiling installation. It is made of ...

Best current price£91.49from Tameson UK

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £91.49

View price history by clicking the chart icon.

Tameson UKHensel Gray Enycase Surface Mounted Wall/Ceiling Box - Dk3525s
Free delivery in 1–3 days
£91.49
Visit shop

Product Information

Full details

The Hensel DK 3525 S is a robust surface mount electrical junction box designed for secure and versatile installations on walls or ceilings. It offers a reliable solution for managing electrical connections, featuring ample space and adaptable entry points. A key benefit is its high protection rating, ensuring durability in various environments, though its size may require careful placement consideration.

All features

Model Part NumberDK 3525 S
BrandHENSEL

Extended Product Information

FAQs

What is the maximum conductor size this box can accommodate?

The Hensel DK 3525 S can accommodate a maximum conductor cross-section of 25mm².

What IP protection rating does this junction box have?

This junction box has both IP55 and IP66 protection degrees, offering resistance to dust and powerful water jets.

Can this box be used outdoors?

Yes, with its IP66 rating, it is suitable for outdoor use where protection against dust and water ingress is crucial.

What material is the junction box made of?

The junction box is made of durable Polycarbonate (PC).

What are the external dimensions of the DK 3525 S?

The external dimensions are 295mm in height, 225mm in width, and 122mm in depth.

Does the box come with glands for cable entry?

The box features 10 entries with breakout ports, but separate cable glands may be required depending on the conduit type and sealing needs.

What is the operating temperature range?

The box is designed to operate within a temperature range of -25°C to 40°C.

Troubleshooting

Cover is difficult to screw on.

Ensure no wires or debris are obstructing the sealing surface. Check that the cover is correctly aligned with the box.

Water ingress detected inside the box.

Immediately disconnect power. Inspect all entry points and the cover seal for damage or improper fitting. Replace any damaged seals or conduits.

Knockouts are not breaking cleanly.

Use a specialized knockout punch or a sharp utility knife with caution. Ensure the material is properly supported before attempting to break the knockout.

Conductors are too large for the clamp.

Verify the conductor size does not exceed the 25mm² maximum. If it does, consider using a larger junction box or alternative wiring methods.

Pros and Cons

Pros

  • Durable and weather-resistant Polycarbonate construction.
  • High IP ratings (IP55 and IP66) for protection against dust and water.
  • Flexible installation options for walls and ceilings.
  • Accommodates large conductor sizes up to 25mm².
  • Multiple entry points with breakout options for various conduit types.

Cons

  • Larger dimensions may limit placement in confined spaces.
  • Requires specific tools for opening and closing the screwed cover.
  • Grey color might not blend with all aesthetic requirements.
  • Maximum operating temperature of 40°C might be a limitation in extremely hot environments.

Setup, Compatibility & Care

Setup:

  1. Mounting: Securely fix the junction box to a suitable wall or ceiling surface using appropriate screws and anchors (not included).
  2. Entries: Identify desired entry points. Remove knockout sections using a suitable tool, ensuring a clean break.
  3. Conduit Installation: Insert electrical conduits into the entry ports. If using non-standard pipes, ensure a snug fit or use appropriate adapters. For rear entry, prepare the corresponding knockout.
  4. Wiring: Route electrical wires through the conduits into the box. Utilize the clamp for secure wire termination if applicable, ensuring compliance with the 25mm² maximum conductor cross-section.
  5. Closing: Place the grey cover back onto the box and secure it by tightening the screws. Ensure the cover is flush and the seal is properly seated.

Compatibility:

  • Compatible with standard and non-standard electrical conduits.
  • Supports conductor cross-sections up to 25mm².
  • Suitable for use with 400V rated insulation systems.

Care:

  • Periodically inspect the exterior for any damage. Clean the exterior with a damp cloth; avoid abrasive cleaners.
  • Ensure the cover remains tightly screwed and the seals are intact to maintain IP rating.
  • Verify that internal connections remain secure and free from corrosion.

Price History

DatePrice
Visit shop