Best current price£12.50from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.50Visit shop B&Q - Triple Rocker Light Switch 2-WayScrewless Primed Ready To Paint With Chrome RockersXdy3S.pd
Visit shop4 offers from £12.50 - £17.64
View price history by clicking the chart icon.
The Varilight Primed Ready to Paint 3-Gang 2-Way Light Switch is designed for interior designers and homeowners who demand a seamless, custom aesthetic that blends perfectly with their wall colors. Its standout feature is the pre-primed, paintable surface, which allows for a bespoke finish that camouflages electrical hardware; however, users should note that the switch requires careful painting techniques to avoid obscuring the rocker mechanism or affecting the smooth operation of the screwless plate.
| Model Part Number | XDY3S.PD |
|---|---|
| Brand | Varilight |
Yes, the switch is pre-primed for most standard interior emulsion or decorative paints.
This is a standard 10 Amp rocker switch, not a dimmer. It will function as an on/off switch for any lighting circuit within its capacity.
The screwless plate uses a backing frame that attaches to the wall box; ensure your existing back box is in good condition to secure the frame.
This switch is rated for 10 Amps at 230V.
Yes, you can paint the rockers, but use very thin coats to ensure they continue to operate smoothly without sticking.
Check for excess paint buildup around the edges of the rocker. Use a fine-grade sandpaper to gently smooth the edges.
Ensure the underlying back box is level and the electrical wires are neatly tucked away to prevent obstruction.
Verify that all wires are securely fastened to the correct terminals and that the switch is compatible with your lighting load.
Ensure that the power is isolated at the consumer unit before beginning any installation. This 10 Amp, 230V switch fits into a standard 86mm x 86mm back box. When painting, it is highly recommended to remove the faceplate from the module. Use thin layers of paint to avoid build-up around the rockers, as excessive paint can cause the switches to stick or become unresponsive. Clean the faceplate with a dry, lint-free cloth, and avoid abrasive cleaning agents that could damage the primer layer.
