Cycle Tyre Sealant - 100ml - WELDTITE

Pressurised latex sealant for fast repair and inflation. Sufficient for two road tyres or one moun...

Best current price£3.00from eBay

All Offers

10 offers from £3.00 - £15.50

View price history by clicking the chart icon.

eBayBike-Cycle-Bicycle Brake & Gear Cable Housing Guides C Clip x 10
Free delivery in 1–3 days
£3.00
Visit shop
OnBuy.comDr Sludge Puncture Protection Sealant (250Ml): - Weldtite 250Ml - Dr Sludge Protection Puncture Sealant Weldtite 250Ml 5013863030140
Free delivery in 1–3 days
£14.47
Visit shop

Product Information

Full details

The WELDTITE Cycle Tyre Sealant - 100ml is designed for cyclists needing a quick, temporary fix for punctures on the go. Its primary benefit is the fast repair and inflation capability, allowing you to resume your ride with minimal downtime. A key caveat is that it's intended for temporary repairs, not permanent solutions. This pressurized latex sealant is easy to use and sufficient for two road tyres or one mountain bike tyre, providing a convenient alternative to carrying bulky repair kits.

All features

Model Part NumberPX3010
BrandWELDTITE

Extended Product Information

FAQs

Is this a permanent repair solution?

No, the WELDTITE Cycle Tyre Sealant is designed for temporary repairs to get you riding again. For a permanent fix, you should inspect and repair or replace the inner tube.

How many tyres can I seal with one can?

The 100ml can is sufficient for two standard road bike tyres or one mountain bike tyre.

Can I use this sealant with tubeless tires?

This product is primarily intended for use with standard inner tubes. While it may offer some temporary sealing in tubeless setups, dedicated tubeless sealants are recommended for optimal performance.

What is the shelf life of the sealant?

While specific shelf life varies, it's best to use the product within a few years of purchase and ensure it is stored correctly. Check the can for any manufacturing or expiry dates if available.

How long does the temporary seal last?

The duration of the temporary seal can vary depending on the size of the puncture and riding conditions. It's designed to get you through a ride, but you should check the tyre and consider a permanent repair as soon as possible.

Do I need a separate pump?

No, the can is pressurized and acts as both the sealant injector and an inflator, so no separate pump is required for the initial repair.

Troubleshooting

Sealant not entering the tyre

Ensure the can is shaken thoroughly. Check that the nozzle is screwed on securely to the valve and that the valve core is not blocked.

Tyre not inflating properly

Shake the can again and ensure it is held upright. The puncture may be too large to seal effectively with this product.

Sealant leaking from the valve stem

Remove the nozzle and ensure the valve core is tight. Reattach the nozzle and try again. If persistent, the valve itself may need inspection or replacement.

Sealant not sealing the puncture

The puncture might be too large or in a location (like the sidewall) that the sealant cannot effectively close. This product is best for smaller tread punctures.

Pros and Cons

Pros

  • Provides fast, on-the-go puncture repair and inflation.
  • Convenient and easy to use, requiring no separate pump.
  • Suitable for various cycling tyre types.
  • Compact and lightweight for portability.
  • Acts as a reliable temporary solution to continue riding.

Cons

  • Intended for temporary repairs only, not permanent fixes.
  • May not seal larger cuts or sidewall damage.
  • Effectiveness can vary depending on the size and location of the puncture.
  • The 100ml size might be insufficient for multiple significant punctures.
  • Requires careful application to avoid sealant spillage.

Setup, Compatibility & Care

Setup:

  1. Shake the can vigorously for at least 30 seconds to ensure the latex is fully mixed.
  2. Remove the valve cap from your punctured tyre.
  3. Screw the sealant nozzle firmly onto the tyre valve.
  4. Press the button on the can to release the sealant and air into the tyre.
  5. Once the tyre is firm, remove the nozzle and spin the wheel to distribute the sealant inside.
  6. Re-inflate the tyre to your desired pressure if needed.

Compatibility:

This sealant is designed for use with all types of cycling tyres, including road, mountain, hybrid, and gravel bike tyres. It is compatible with both Presta and Schrader valves when used with the appropriate adapter if necessary (though the nozzle typically fits both).

Care:

  • Store the can in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Keep out of reach of children.
  • Avoid puncturing or incinerating the can, even when empty.
  • Clean any sealant that gets on the bike frame or components immediately with a damp cloth.

Price History

DatePrice
Visit shop