Setup, Compatibility & Care
Compatibility:
This filter is a compatible replacement specifically designed for the Montpellier Dishwasher DW1064P. Always verify your dishwasher model number before purchasing to ensure a proper fit.
Setup:
- Ensure the dishwasher is switched off and unplugged from the power supply.
- Open the dishwasher door.
- Locate the filter assembly, typically at the bottom of the dishwasher cavity.
- Carefully unlock and remove the old filter unit (this usually involves twisting and pulling).
- Clean the filter housing area.
- Insert the new SPARES2GO filter components (outer mesh and inner debris filter) securely into place, ensuring they lock correctly.
- Close the dishwasher door, plug the appliance back in, and switch it on.
Care:
- Regular Cleaning: It is recommended to remove and rinse the filter under running water after every few wash cycles, or at least weekly, depending on usage. Use a soft brush to remove any stubborn debris.
- Deep Cleaning: Periodically (e.g., monthly), perform a more thorough clean. Soak the filters in warm, soapy water and use a soft brush to clean both the mesh and the inner filter.
- Inspection: Check the filters for any damage, such as tears in the mesh or cracks in the plastic. Replace immediately if damaged.