Mira Nectar Shower Rail Kit - Chrome
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Mira Nectar Shower Rail Kit is designed for any homeowner looking to upgrade their shower experience with a versatile and high-performing kit. Its key benefit is the efficient performance across all water pressure systems, ensuring a consistent shower, though it requires standard plumbing connections for installation. This kit includes a shower handset, hose, and rail with a soap dish, featuring rub-clean nozzles for easy maintenance.
All features
| Model Part Number | 2.1703.390 |
|---|---|
| Brand | Mira |
Extended Product Information
FAQs
What is the water pressure range for this shower kit?
The Mira Nectar Shower Rail Kit works efficiently on any water pressure system, with a recommended range of 0.1 to 5.0 bar.
Is this shower kit difficult to install?
The kit is designed for straightforward installation with a twist and lock clamp bracket. However, basic plumbing knowledge and ensuring wall suitability are recommended.
How do I clean the rub-clean nozzles?
To remove limescale, simply rub the nozzles gently with your finger or a soft cloth. Regular wiping with a damp cloth will help maintain the chrome finish.
What is included in the Mira Nectar Shower Rail Kit?
The kit includes the shower handset, a 1.75-meter shower hose, the shower rail, a soap dish with an integrated hose retaining ring, and the necessary mounting bracket.
Can I use this kit with any type of shower?
Yes, this kit is suitable for use with all types of showers and is WRAS approved.
What is the length of the shower hose?
The shower hose included is 1750mm (1.75 meters) long.
What are the fixing point dimensions for the rail?
The fixing points for the rail are adjustable and can be set between 400mm and 620mm.
Troubleshooting
Low water flow from the showerhead
Check that the water pressure is within the recommended range (0.1-5.0 bar). Ensure the rub-clean nozzles are free from limescale buildup. Inspect the hose and connections for any kinks or blockages.
Showerhead keeps dripping after use
Ensure the shower control is fully turned off. If dripping persists, there may be an issue with the shower valve itself, which is separate from the rail kit.
Bracket not securely attached to the wall
Verify that the wall surface is suitable for mounting. Ensure the twist and lock mechanism is fully engaged and tightened according to the installation guide. If mounting on tiles, use appropriate tile drill bits and wall plugs.
Hose is leaking at the connection point
Check that the hose is securely connected to both the handset and the wall outlet. Ensure any seals or washers are correctly seated. Hand-tighten connections firmly, but do not overtighten.
Pros and Cons
Pros
- Works efficiently on any water pressure system (0.1-5.0 bar).
- WRAS approved for safety and compliance.
- Easy to install with the twist and lock clamp bracket.
- Rub-clean nozzles simplify limescale removal.
- Includes all necessary components: handset, hose, and rail.
- Stylish chrome finish complements modern bathrooms.
Cons
- Requires standard plumbing knowledge for installation.
- Only one finish (chrome) is available.
- Fixing points range from 400mm to 620mm, which may require existing hole adjustments.
- The soap dish might be small for larger bottles.
Setup, Compatibility & Care
Setup: The Mira Nectar Shower Rail Kit is designed for straightforward installation. It utilizes a twist and lock clamp bracket system, which often allows for fitting without needing to drill new holes if replacing an existing rail in a compatible position. Ensure the wall is suitable for mounting. The rail's fixing points are adjustable between 400mm and 620mm. Connect the 1/2" BSP hose to your existing water outlet. Always follow the manufacturer's detailed installation instructions provided with the product.
Compatibility: This kit is universally compatible with all types of showers and operates efficiently within a water pressure range of 0.1 to 5.0 bar. It is WRAS approved, meeting stringent UK water regulations.
Care: To maintain the chrome finish and the functionality of the rub-clean nozzles, regularly wipe the showerhead and rail with a soft, damp cloth. For limescale, gently rub the nozzles with your finger or a soft cloth. Avoid using abrasive cleaners or scouring pads, as these can damage the finish.