Apico Rim Sticker Kit - 21" Front 18" Rear - Red/white

This kit is specifically designed for 21-inch front rims and 18-inch rear rims.

The stickers are made from the highest quality vinyl.

Yes, the packaging includes Apico Factory Racing stickers for application on the swing arm or fork area.

Clean the rims with mild soap and water. Avoid abrasive cleaners or pressure washing directly on the sticker edges.

Yes, vinyl stickers can typically be removed. Gentle heat from a hairdryer can help soften the adhesive, making removal easier. Be aware that some residue may remain, requiring cleaning.

As long as the aftermarket rims are standard 21" front and 18" rear sizes and have a relatively smooth surface, the stickers should fit. However, very custom rim shapes might present challenges.

These stickers are made in the UK.

Ensure the rim surface is completely clean, dry, and free of contaminants. Reheat the sticker slightly with a hairdryer and reapply, pressing firmly. For stubborn areas, a specialized vinyl adhesion promoter (used sparingly) might help, but test in an inconspicuous area first.

Carefully lift the edge of the sticker near the bubble and use a pin to prick a tiny hole in the bubble. Then, smooth the sticker down firmly to release the air. Alternatively, gently reheat the area and smooth out the bubble.

Apply gentle heat with a hairdryer on a low setting while stretching and pressing the sticker into place. This makes the vinyl more pliable. Ensure you are not overstretching, which can distort the design or weaken the adhesive.

Use a very sharp hobby knife or razor blade. Make slow, controlled cuts. Practicing on a scrap piece of vinyl first can help you get a feel for the material.