Sage 4 Light Ceiling Spotlight Plate - Grey

No, the Sage 4 Light Ceiling Spotlight requires 4 x GU10 bulbs, which must be purchased separately.

No, the fixture is rated for a maximum of 5W per bulb. Using a higher wattage bulb may cause overheating and damage the fixture.

The fixture itself is compatible with dimming, but you must ensure you use dimmable GU10 LED bulbs and a compatible dimmer switch.

The square ceiling plate measures 23cm in length and 23cm in depth.

This product does not list an IP rating, so it is intended for dry indoor areas like living rooms, hallways, and kitchens, rather than high-humidity environments like bathrooms.

Simply grip the head of the spotlight and tilt or rotate it to your desired angle; the internal tension mechanism will hold it in place.

Ensure all four GU10 bulbs are tightly seated in their sockets and check that the wiring connection to the ceiling is secure.

Check the tension screw at the joint of the lamp head; if it feels loose, gently tighten it to increase resistance.

Test the non-working bulb in a different socket to rule out a faulty bulb; if the socket remains dead, inspect the socket pins for damage.