Blackmagic Design 2110 IP Mini BiDirect 12G Converter

SMPTE-2110 is a suite of standards for transmitting video, audio, and data over IP networks in professional broadcast environments, ensuring interoperability and high-quality uncompressed media transport.

No, this converter requires a 10 Gigabit Ethernet (10GbE) connection for full performance, especially for Ultra HD signals, due to the high bandwidth requirements of uncompressed video.

No, the converter itself does not supply power to the connected camera. Power is supplied to the converter via its DC input or Power over Ethernet (PoE).

The converter supports SD, HD, and Ultra HD signals up to 2160p60, covering various frame rates and resolutions within these standards.

For simple point-to-point connections, the auto-configuring nature of the device minimizes IT setup. However, for larger or more complex network integrations, basic IP networking knowledge or assistance from an IT professional may be beneficial.

The SDI program return allows a program feed to be sent back to the camera operator or director, providing essential monitoring and confidence in live production scenarios.

The typical power consumption is 18W. It can be powered via the included DC power adapter or via Power over Ethernet (PoE).

Verify SDI cable connections on both input and output. Ensure the source camera is outputting a compatible signal format. Check if the IP connection is active and correctly configured.

Ensure the DC power adapter is securely connected to both the converter and a working power outlet. If using PoE, confirm the network switch supports and is configured for PoE on the 10G port.

Check that the talkback headset is properly connected to the 5-pin XLR port. Verify that the talkback button is being pressed and that the volume control is adjusted.

Ensure the 10G Ethernet network is not congested. Check network cable integrity. Verify that the network switch is capable of handling the required bandwidth for uncompressed video.

Confirm the IP address configuration (if manually set) or ensure DHCP is available. Check network cable and port status. Consult your network administrator for IP address allocation and network settings.