Best current price£120.19from B&Q
Shopping.co.uk recommended and popular offers
B&Q£120.19Visit shop B&Q - Pneumatic Air Portable Pressure Brake + Clutch Bleeder Bleeding Kit + Adaptors
Visit shop2 offers from £120.19
View price history by clicking the chart icon.
This AB Tools Pneumatic Pressure Bleeder Kit is designed for mechanics and DIY enthusiasts needing to service brake and clutch systems. Its key benefit is enabling one-person fluid changes and air removal, a significant time-saver and error reducer. A potential caveat is the need for an air compressor to operate. The kit includes a portable, low-pressure tank that can be pre-charged, a large reservoir to prevent running dry, and 11 master cylinder adapters suitable for a wide range of domestic and imported vehicles, including those with ABS systems.
| Model Part Number | AN492 |
|---|---|
| Brand | AB Tools |
Yes, the AB Tools Pneumatic Pressure Bleeder Kit is suitable for use on vehicles equipped with ABS systems.
The working air pressure for this kit is between 10 and 40 psi. It consumes approximately 4.5 CFM at 30 PSI.
The kit is designed for most domestic and imported vehicles, including European, US, and Japanese models, thanks to the 11 included master cylinder adapters.
No, an air compressor is required to supply the necessary air pressure for the pneumatic operation of the bleeder kit.
All 11 master cylinder adapters are conveniently stored in the included durable blow-molded case.
The kit includes 1 adapter kit, 1 bleed tank with a pressure gauge, 2 collection bottles, and 1 fluid hose with a quick-release connector.
The large reservoir reduces the risk of running the brake or clutch system dry during the bleeding process or a complete fluid change, ensuring a more thorough job.
Check all connections for leaks, including the air inlet, fluid hose, and master cylinder adapter. Ensure the master cylinder cap seal is intact and properly seated.
Verify the correct adapter is used and sealed tightly. Ensure the bleed tank is adequately pressurized (10-40 psi). Check the fluid level in the master cylinder reservoir to ensure it doesn't run dry.
Confirm you are using the correct adapter for your vehicle's master cylinder. Inspect the adapter and the master cylinder opening for any damage or debris. Try a different adapter if available.
Ensure the 1/4" male quick coupler on the bleeder kit is clean and free of debris. Check the coupler on your air hose for compatibility and proper function.
Setup: Ensure a clean workspace. Connect your compressed air source to the 1/4" male quick coupler. Select the appropriate master cylinder adapter from the included kit for your vehicle's brake or clutch master cylinder. Attach the fluid hose to the bleed tank and the chosen adapter. Pre-charge the bleed tank with compressed air to the desired working pressure (10-40 psi).
Compatibility: This kit is designed for most domestic and imported vehicle brake and clutch systems, including those with ABS. The 11 included adapters cover a broad spectrum of master cylinder types.
Care: After each use, clean the bleed tank and fluid hose. Ensure all components are dry before storing them in the provided blow-molded case. Periodically check the air inlet for debris and ensure the quick-release connector is functioning correctly. Store the kit in a dry environment.
