Best current price£217.99from GhostBikes.com
Shopping.co.uk recommended and popular offers
GhostBikes.com£217.99Visit shop Oxa Stainless Steel 64320001 - Racing Finish Front Pipe For Sherco Se 125 2018-2025
Visit shop1 offer from £217.99
View price history by clicking the chart icon.
The Oxa Racing Finish Front Pipe is an essential upgrade for Sherco SE 125 (2018-2025) owners looking to optimize engine output and improve durability during technical off-road riding. Designed to increase overall power delivery and offer superior ground clearance, this pipe is a performance-focused component that prioritizes impact resistance; however, riders should be aware that the varnish finish requires consistent maintenance to prevent corrosion compared to plated alternatives.
| Model Part Number | 64320001 |
|---|---|
| Brand | Oxa |
No, this pipe is designed exclusively for the 125cc engine geometry and mounting points.
While often not strictly required, adjusting your jetting is recommended to fully realize the power gains and ensure the engine runs optimally with the increased airflow.
Oxa pipes are designed for closed-course racing use and generally do not meet street-legal noise or emission standards.
Keep the pipe clean and dry after rides. Applying a light mist of WD-40 or a specific rust-inhibitor spray while the pipe is cool helps protect the finish.
Check the specific packaging contents upon arrival, as hardware inclusion may vary; however, it is highly recommended to install fresh O-rings whenever swapping an exhaust pipe.
Check and replace the exhaust O-rings and ensure the spring tension is sufficient to pull the pipe tight against the flange.
Use a fine-grit scotch brite pad to remove surface rust, clean the area, and re-apply a heat-resistant clear coat or light oil.
Loosely install all mounting bolts before tightening any of them down to ensure the pipe is correctly aligned with the engine.
Installation requires basic mechanical knowledge and standard motorcycle tools. Ensure the O-ring seals at the exhaust port are in good condition before attaching the new pipe to maintain a proper seal.
Compatibility: This pipe is strictly for Sherco SE 125 models manufactured between 2018 and 2025. Do not attempt to fit this on other displacement models as mounting points and header geometry differ.
Care: Because the pipe features a racing varnish finish, it is not as weather-resistant as plated pipes. After every wash, it is recommended to wipe the pipe down with a thin coat of light oil or a dedicated exhaust protectant spray to prevent oxidation and flash rust, especially if you ride in wet or muddy conditions.
