Plumbright Barrel Nipple - 1/2 inch
Best current price£4.00from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£4.00Visit shop Plumbright Brass Barrel Nipple 1/2" Prbrbrln12
Visit shopCity Plumbing GB£4.00Visit shop One Offer
1 offer from £4.00
View price history by clicking the chart icon.
City Plumbing GBPlumbright Brass Barrel Nipple 1/2" Prbrbrln12
Free delivery in 1–3 days
£4.00
Visit shop
Product Information
Full details
The Plumbright Barrel Nipple is an essential plumbing component designed for professional contractors and dedicated DIY enthusiasts who require secure, leak-free connections in their piping systems. This 1/2 inch connector provides a robust transition point for various applications, though users should ensure their pipe threading matches the standard NPT specifications for an optimal seal.
All features
| Model Part Number | Prbrbrln12 |
|---|---|
| Brand | Plumbright |
Extended Product Information
FAQs
Is this barrel nipple compatible with plastic pipes?
This component is designed for metal piping systems. If using with plastic or PEX, you must ensure you have the correct threaded adapter to avoid damaging the pipe.
Do I need to use plumber's tape?
Yes, it is highly recommended to use thread seal tape or pipe dope to ensure a watertight seal on all threaded connections.
What does the 1/2 inch size refer to?
The 1/2 inch measurement refers to the nominal pipe size (NPS) diameter, not the actual outer diameter of the threads.
Can this be used for gas lines?
This product is primarily for water plumbing. Consult local building codes before using any fitting in a gas line application.
Is this product reusable?
While theoretically possible, it is recommended to replace the nipple if it has been subjected to significant torque or if the threads appear worn or deformed.
Troubleshooting
The connection is leaking after installation
Unscrew the fitting, inspect the threads for damage, reapply a fresh layer of thread seal tape, and tighten firmly.
Difficult to thread the nipple into the fitting
Ensure that the threads are clean of paint or metal burrs. Verify that the fitting you are connecting to is also 1/2 inch NPT compatible.
Pros and Cons
Pros
- High-quality, durable build material
- Precision-cut threads for easy assembly
- Compatible with most standard 1/2 inch piping systems
- Cost-effective solution for plumbing repairs
Cons
- Requires proper sealing compound or tape for leak-proof results
- Not intended for high-pressure industrial steam applications
- Limited to 1/2 inch internal diameter systems
Setup, Compatibility & Care
To install your Plumbright Barrel Nipple, follow these steps:
- Ensure the piping system is depressurized and drained.
- Clean the existing threads on both connection points to remove debris.
- Apply thread seal tape or an appropriate pipe joint compound to the threads of the nipple.
- Thread the nipple into the first fitting by hand, then use a pipe wrench to tighten until secure.
- Attach the secondary fitting and tighten to ensure a snug fit, being careful not to over-tighten and strip the threads.
Compatibility: This unit is rated for 1/2 inch NPT standard plumbing pipes. Always check for debris in the threads periodically to maintain the integrity of the connection. Keep the unit stored in a dry location to prevent premature oxidation.