oliso M3Pro Mini Project Iron - 220V/120V

The ergonomic design is intended to fit snugly in your hand, which helps to minimize wrist strain during prolonged use, especially when performing detailed ironing tasks.

The M3Pro is a mini project iron, best suited for detailed work, small items, and travel. It is not designed for efficiently ironing large fabric surfaces like bedsheets or full garments.

Before plugging in, locate the voltage switch (usually near the power cord) and set it to either 120V or 220V according to your local power supply. Incorrect voltage setting can damage the iron.

Once the iron is completely cool, wipe the soleplate with a soft, damp cloth. For tougher residue, use a specialized iron soleplate cleaner. Avoid abrasive materials or harsh chemicals.

The ProLight is an integrated light that illuminates the ironing surface, helping you see and work more accurately on intricate details and dark fabrics.

The iron has an extended standby mode, shutting off automatically after 30 minutes of inactivity in a vertical position or 10 minutes in a horizontal position as a safety measure.

Yes, you can use tap water. However, if you live in an area with very hard water, using distilled or demineralized water is recommended to prevent mineral buildup inside the iron over time.

Ensure the iron is plugged into a working outlet and that the voltage setting is correct for your region. Check if the power indicator light is on. If not, try a different outlet.

Ensure the iron has reached its operating temperature. Check that the steam setting is activated and that there is sufficient water in the reservoir (if applicable for this model, otherwise it may be a dry iron). For models with steam, ensure the steam holes are not clogged; clean as per care instructions.

Ensure the soleplate is clean and free from residue. Check that the iron's temperature is appropriate for the fabric type. Avoid using overly high heat settings.

The iron has built-in safety features. If it is not moved for 30 minutes in a vertical position or 10 minutes in a horizontal position, it will enter standby or shut off. Move the iron to reactivate it.