Best current price£36.85from eBay
Shopping.co.uk recommended and popular offers
eBay£36.85Visit shop US PRO Tools 3L Transmission Oil Filler System with 8 ATF Adaptors 5056
Visit shop3 offers from £36.85
View price history by clicking the chart icon.
This manual brake fluid bleeding and refill system from US PRO Tools is designed for automotive professionals and DIY enthusiasts who need to efficiently bleed, flush, and replace brake fluid in vehicle braking systems. Its hand-operated pump builds pressure within the system, while a control valve precisely manages fluid flow, simplifying a often complex maintenance task. A potential caveat is the need for manual operation, requiring sustained effort for larger systems.
| Model Part Number | 6246 |
|---|---|
| Brand | us pro |
Yes, this system is designed for standard hydraulic brake systems, which include those found in vehicles with ABS. However, always follow the specific service manual procedures for your vehicle's ABS system.
This system is compatible with all common types of automotive hydraulic brake fluids, including DOT 3, DOT 4, and DOT 5.1. Always use the fluid type recommended by your vehicle manufacturer.
The system has a total fluid capacity of 3 liters.
Yes, the manual pump allows for pressure to be built and maintained, enabling a single person to effectively bleed and refill the brake system.
After each use, it is crucial to clean the system thoroughly with a suitable solvent to remove residual brake fluid and prevent damage to seals and hoses. Inspect components regularly for wear.
You will need the appropriate wrench to open and close the vehicle's bleed screws, and potentially different adapters depending on your vehicle model. Ensure your vehicle's brake fluid reservoir is accessible.
Ensure the hand pump is fully engaged and seals are intact. Check that the control valve is in the closed position before pumping. Verify all connections are secure and leak-free.
Ensure the correct adapter is being used for the vehicle's bleed screw. Try a different adapter if available, or ensure the existing adapter is seated properly and tightened securely without overtightening.
Re-establish pressure and open the bleed screw again, ensuring the control valve allows steady fluid flow. Check for any potential air ingress points in the hose connections or adapter.
Verify the control valve is regulating flow correctly and the bleed screw is sufficiently open. Ensure the vehicle's brake fluid reservoir is not overfilled, which could impede flow.
Setup:
Compatibility:
This system is designed for use with standard automotive hydraulic brake systems. While it includes universal adapters, specific vehicle models may require specialized bleed screw adapters for a secure and leak-free connection. Always consult your vehicle's service manual for specific brake fluid types and procedures.
Care:
After each use, thoroughly clean the system with a brake cleaner or appropriate solvent to remove residual brake fluid, which can degrade rubber components over time. Store the unit in a clean, dry place. Inspect hoses and seals regularly for wear or damage.
