Best current price£42.99from Homebase
Shopping.co.uk recommended and popular offers
Homebase£42.99Visit shop Cuprinol Uv Guard Teak Decking Oil 5L
Visit shop
B&Q£46.00Visit shop B&Q - Uv Guard Teak Wood Oil5L
Visit shop6 offers from £42.99 - £58.55
View price history by clicking the chart icon.
This guide is for homeowners and DIY enthusiasts looking to protect and enhance their exterior wood surfaces, particularly decking. The key benefit is revitalizing aged wood color and providing long-lasting protection against weathering. A potential caveat is that the tinted formula may alter the original wood tone.
| Brand | Cuprinol |
|---|
Reapplication is generally recommended every 1-2 years, or when you notice that water no longer beads on the surface, indicating the protection is diminishing.
Yes, it can be used on new wood to provide protection from the start. Ensure the wood is clean and dry before application. For some new woods, a specific pre-treatment might be recommended by the wood manufacturer.
Yes, the 'Teak' shade is a tinted formula designed to revitalize aged wood. It will impart a warm, teak-like color. If you prefer to maintain the exact original color, consider a clear decking oil.
Coverage varies depending on the porosity and condition of the wood. A 5L can typically covers approximately 15-25 square meters per coat for decking, but always check the product label for the most accurate coverage information.
No, this oil is designed for bare wood. Existing paint or varnish must be completely removed and the wood prepared to a bare, clean, and dry state before application.
The oil can be applied using a good quality brush or an applicator pad. Apply liberally and evenly along the grain, ensuring saturation without leaving puddles.
Ensure the oil was applied evenly and that excess was wiped off before it dried. Apply a second thin coat if necessary, ensuring even coverage.
The surface may not have been adequately prepared, or the product may not have fully cured. Ensure the wood was dry and clean before application. A second coat might be needed after the first has fully dried and cured.
This can occur if the oil was not applied evenly or if the wood was not uniformly porous. Try to blend the finish while wet or consider a light sanding and reapplication of a thin, even coat.
Ensure the product has been stored correctly and is not past its shelf life. Stir thoroughly before use. Avoid applying in very cold temperatures, as this can thicken the oil.
Preparation is Key: Ensure the wood surface is clean, dry, and free from dirt, grease, and any previous coatings. For best results, lightly sand any rough patches and remove dust. If the wood is already treated with a different product, it may need to be stripped back to bare wood.
Application: Apply the oil liberally using a good quality brush or applicator pad. Work along the grain of the wood, ensuring an even coat. For very dry or porous wood, a second coat may be applied after 4-6 hours, following the same procedure. Allow the oil to penetrate fully.
Compatibility: This product is designed for use on all types of exterior woodwork, including hardwoods and softwoods. It is particularly effective on decking, garden furniture, fences, and sheds. Do not use on surfaces previously treated with paints or varnishes without full preparation.
Care: Clean application tools with water immediately after use. Store the product in a cool, dry place, away from direct sunlight and frost. Reapplication is typically recommended every 1-2 years, or when water no longer beads on the surface, to maintain protection.
