Best current price£6.24from eBay
Shopping.co.uk recommended and popular offers
eBay£6.24Visit shop PrimaPress M-Class Pressfit Reducing Tee 22mm x 22mm x 15mm - 30076225
Visit shop
The Range£8.58Visit shop Primapress Pressfit 22X22x15mm Branch Tee - Grey
Visit shop6 offers from £6.24 - £9.66
View price history by clicking the chart icon.
The PrimaPress Pressfit Reducing Tee is designed for professional plumbers and contractors looking for a reliable, time-saving solution for plumbing and HVAC installations. It provides a secure, leak-proof connection for water, gas, and glycol systems without the need for traditional soldering; however, it requires the use of specialized M-profile press tooling for a successful installation.
| Model Part Number | 22X22X15mm |
|---|---|
| Brand | PrimaPress |
Yes, the PrimaPress system is suitable for gas, water, and glycol applications, provided it is installed per local gas safety regulations.
You must use an M-profile press jaw. The product is compatible with all standard press tools that accept M-jaw profiles.
No, PrimaPress fittings are designed for a single-use permanent installation. Once pressed, they cannot be removed or reused.
The product comes with a 50-year manufacturing defect warranty when installed correctly according to specifications.
While the connection is internal, wipe the exterior with a clean cloth to remove any debris or oils before commissioning the system.
Check if the pipe was fully inserted to the stop or if the pipe surface had scratches or burrs prior to pressing.
Verify that you are using an M-profile jaw; V-profile or other jaw types will not seat correctly and may damage the fitting.
The fitting is likely under-pressed. Verify the press tool is calibrated and the jaw is fully seated on the fitting bead.
To ensure a lifetime of service, follow these installation guidelines: First, ensure the copper pipe ends are clean, burr-free, and undamaged. Measure and mark the insertion depth on the pipe to confirm it reaches the internal stop of the fitting. Using an M-profile jaw, ensure the press tool is perpendicular to the fitting before initiating the cycle. Never attempt to press the same fitting twice. For maintenance, keep the fitting free from aggressive chemicals and ensure the system is monitored for leaks during the initial commissioning phase. The product is designed for permanent installation and should not be disassembled once pressed.
