Best current price£7.94from eBay
Shopping.co.uk recommended and popular offers
eBay£7.94Visit shop MK K4896WDRWHI Grid Plus Grid Switch 20 amp Double Pole marked washer dryer
Visit shop
B&Q£14.15Visit shop B&Q - K4896Wdrwhi Grid Plus Grid Switch 20 Amp Double Pole (White) Marked Washer Dryer
Visit shop4 offers from £7.94 - £14.15
View price history by clicking the chart icon.
This MK Grid Plus Grid Switch (K4896Wdrwhi) is designed for electricians and homeowners needing a reliable double pole switch specifically marked for washer dryer applications. Its key benefit is providing a dedicated, safe control for high-load appliances, ensuring compliance and preventing accidental operation. A caveat is its modular nature, requiring integration into a Grid Plus faceplate system.
| Model Part Number | K4896Wdrwhi |
|---|---|
| Brand | MK |
A double pole switch controls both the live and neutral conductors of an electrical circuit simultaneously. This provides a more complete disconnection from the power supply compared to a single pole switch.
While rated for 20 amps, its specific 'Washer Dryer' marking suggests its primary intended use is for such appliances. For other high-load applications, ensure compatibility and consider appropriate labeling.
Yes, this is a modular grid switch and requires a compatible MK Grid Plus faceplate to be installed. It will not fit standard single or double electrical back boxes without the appropriate Grid Plus system.
DP stands for Double Pole, indicating that the switch disconnects both the live and neutral wires.
Installation of electrical components should only be carried out by a qualified electrician to ensure safety and compliance with regulations.
The switch has two input terminals and two output terminals, designed for the incoming power and the outgoing supply to the appliance.
Verify that the power is on at the consumer unit. Check that the wiring connections to the switch are secure and correct for a double pole configuration. Ensure the switch is correctly seated within the Grid Plus faceplate.
The appliance may be drawing more than the 20-amp rating, or there could be a fault within the appliance itself. Check the appliance's power rating. Consult a qualified electrician if the issue persists.
Ensure the switch module is properly clipped into the Grid Plus frame and that the faceplate is securely fastened to the wall box. Check that all mounting screws are tightened appropriately.
Setup: This is a modular grid switch and requires installation into a compatible MK Grid Plus faceplate. Ensure the power supply is isolated at the consumer unit before attempting installation. Connect the mains input to the designated input terminals and the appliance output to the output terminals, following standard electrical wiring practices.
Compatibility: This switch is specifically designed for the MK Grid Plus modular system. It is compatible with all MK Grid Plus faceplates and can be combined with other Grid Plus modules (e.g., sockets, indicator lights) within the same faceplate.
Care: To clean, ensure the power is switched off at the source. Use a dry or slightly damp, lint-free cloth to wipe the switch. Avoid using abrasive cleaners or solvents, as they may damage the finish. Regular checks of connections are recommended as part of routine electrical maintenance.
