Best current price£79.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£79.99Visit shop B&Q - Xled Curved S Anthracite Floodlight Motion Sensor Wall Spot Led Security Light
Visit shop5 offers from £79.99 - £220.01
View price history by clicking the chart icon.
The Steinel Xled curved S outdoor spotlight is designed for homeowners seeking efficient and effective illumination for entrances and garden paths. Its key benefit is providing pleasant, safety-enhancing light with significant energy savings (up to 80% compared to conventional LEDs) thanks to its integrated motion and light sensors. A minor caveat is that the LED lamp is not user-exchangeable, requiring fixture replacement if the LED fails. This fixture offers a motion-activated lighting solution that enhances security and ambiance.
| Colour | Grey |
|---|---|
| Model Part Number | 012076 |
| Brand | Steinel |
The motion sensor has a detection distance of up to 8 meters and a detection angle of 160°.
No, the integrated LED lamp is not user-exchangeable. It is designed for a long lifespan of 50,000 hours.
The light has a color temperature of 4000 K (cool white) and a luminous flux of 690 lm.
The fixture has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction.
While it has a light sensor, its primary design is motion-activated. It will only illuminate when motion is detected in low light conditions. It's not intended for continuous, full-time illumination.
The fixture requires a 220-240V AC power supply.
The housing is constructed from aluminum and plastic.
Check that the power supply is connected and switched on. Verify that the ambient light level is low enough to trigger the light sensor. Ensure the motion sensor is not obstructed and adjust its sensitivity if necessary. Test the bulb's functionality by bypassing the sensor if possible (requires electrical knowledge).
Confirm that the light sensor is not being constantly triggered by ambient light (e.g., streetlights). Check if the motion sensor is stuck in a 'triggered' state due to continuous movement or a malfunction. Ensure the timer setting (if applicable and adjustable) is set correctly.
Inspect the power connections for looseness. Ensure the AC input voltage is stable within the specified range (220-240V). Check for any potential interference from other electrical devices. If the issue persists, the internal LED driver may require service.
Ensure the sensor lens is clean and free from dust, dirt, or cobwebs. Check that nothing is obstructing the sensor's field of view. Make sure the fixture is mounted at the recommended height for optimal detection.
Setup:
Compatibility:
Care:
