DMR SECT bar grips push on - DMR
Best current price£7.99from Tredz
Best offers
Shopping.co.uk recommended and popular offers
Tredz£7.99Visit shop Dmr Navy Blue Sect Dirt Jump Grips
Visit shopTredz£7.99Visit shop All Offers
3 offers from £7.99 - £11.00
View price history by clicking the chart icon.
Product Information
Full details
The DMR SECT bar grips are designed for dirt jump and park riders seeking enhanced durability and control. They build upon the classic mushroom design with a reinforced thumb patch to combat wear and remove the end bulge for a more secure hand position. A potential caveat is the single-density grip might be too soft for riders who prefer a firmer feel.
All features
| Model Part Number | DMR-G-S-NB |
|---|---|
| Brand | DMR |
Extended Product Information
FAQs
What makes the thumb patch special?
The thumb patch is an integrated, thicker section of rubber specifically placed where mushroom grips commonly wear down due to thumb pressure and friction. This enhances the overall lifespan of the grip.
Can I use these grips with metal bar ends?
Yes, the end of the grip is designed to be cut off, allowing you to install metal bar ends for added durability and a custom look. A sharp utility knife is recommended for cutting.
What is the main advantage of the open-ended design?
The open-ended design, without a bulky end cap, allows riders to grip the handlebar right at the very edge. This provides more control and leverage, especially useful for techniques like bar spins or precise steering adjustments.
What material are the grips made of?
The DMR SECT grips are made from a single density of soft Kraton rubber.
Are these grips suitable for all types of cycling?
These grips are optimized for aggressive disciplines like dirt jumping and park riding due to their durable design and control-focused features. While they can be used for general trail riding, riders seeking maximum cushioning or specific ergonomic shapes might prefer other models.
How do I clean my DMR SECT grips?
Clean them with a damp cloth and a mild soap solution. Rinse with clean water and allow them to air dry completely before use. Avoid using harsh solvents or abrasive cleaners.
Do these grips come with bar ends?
Yes, each pair of DMR SECT grips includes an interior bar plug to protect the handlebar end from dirt and damage. You can also replace this with aftermarket metal bar ends if desired.
Troubleshooting
Grips are difficult to slide on.
Clean the inside of the grip and the handlebar. Apply a small amount of grip glue, isopropyl alcohol, or water with a drop of soap to help them slide on. Ensure no obstructions are inside the grip.
Grips are spinning on the handlebars.
The grips may not have been installed with enough adhesive or may have become loose over time. Remove the grips, clean both surfaces thoroughly, and re-install using a strong grip glue or by following the isopropyl alcohol method and allowing ample drying time.
Thumb patch wears out too quickly.
While the thumb patch is reinforced, aggressive riding or specific techniques might still cause premature wear. Ensure you are using the included interior bar plug or compatible bar ends to protect the grip end. Consider alternative grip compounds if extreme durability is needed.
Difficulty cutting the grip for metal bar ends.
Use a sharp, fresh utility knife or razor blade. Make multiple shallow passes rather than attempting to cut through in one go. Ensure the grip is firmly held while cutting to prevent slippage.
Pros and Cons
Pros
- Enhanced durability in high-wear thumb area.
- Improved grip control due to open-ended design.
- Comfortable, shock-absorbing mushroom pattern.
- Soft feel for extended riding sessions.
- Compatible with custom bar-end setups.
Cons
- Single-density rubber may feel too soft for some riders.
- Open-ended design might require careful bar plug installation.
- Kraton rubber can degrade with prolonged exposure to certain chemicals.
- May not offer the same level of vibration isolation as dual-density grips.
Setup, Compatibility & Care
Setup:
- Ensure handlebars are clean and free of old grip residue.
- Apply a small amount of grip glue or isopropyl alcohol to the inside of the grip for easier installation (optional, but recommended for a secure fit).
- Slide the DMR SECT grips onto the handlebars, ensuring they are fully seated.
- If using metal bar ends, carefully cut off the end of the grip at the designated mark using a sharp utility knife.
- Insert the included interior bar plug or your chosen metal bar ends.
Compatibility:
- These grips are designed to fit standard 22.2mm diameter handlebars, common on most mountain bikes, BMX, and dirt jump bikes.
- Compatible with most standard bar end plugs and aftermarket metal bar ends (requires cutting grip end).
Care:
- Clean regularly with a damp cloth and mild soap.
- Avoid harsh chemicals or solvents, as they can degrade the Kraton rubber.
- Store in a cool, dry place away from direct sunlight when not in use.