Forgefix Spring Washer - M10 - Silver

The primary benefit is to prevent fasteners from loosening due to vibration by providing a spring force that maintains tension.

M10 refers to the metric thread size, indicating it is designed for use with M10 bolts, screws, and nuts.

The finish is bright zinc plated, which provides enhanced corrosion resistance.

Yes, the bright zinc plating offers good corrosion resistance suitable for many outdoor applications, provided it's not exposed to highly corrosive environments.

The split end of the washer should typically face away from the bolt head or nut.

The washer is made from steel.

Spring washers are most effective in applications experiencing vibration or dynamic loads. For static joints without vibration, a flat washer or lock washer might be more appropriate depending on the need.

Ensure the correct size M10 washer was used and that it is properly compressed. Verify that the bolt and mating surface are clean and free of debris. For extreme vibration, consider lock nuts or thread-locking compounds in addition to the spring washer.

Inspect the washer for cracks or excessive bending. If damaged, it should be replaced to ensure proper function. Avoid over-tightening.

While zinc plating offers resistance, prolonged exposure to moisture or corrosive elements can cause rust. Store in a dry place and replace if corrosion compromises integrity.