Best current price£49.16from eBay
Shopping.co.uk recommended and popular offers
eBay£49.16Visit shop Exhaust Temperature Sensor After DPF 49281 Febi 03L906088G 3L906088G Quality New
Visit shop10 offers from £49.16 - £55.40
View price history by clicking the chart icon.
This Febi Bilstein Exhaust Temperature Sensor (part number 49281) is designed for VW GOLF Mk6 2.0D models (2008-2013) with the CJAA engine code and a Diesel Particulate Filter (DPF). It offers a direct replacement for your vehicle's original sensor, helping to maintain accurate exhaust system monitoring for optimal DPF performance. A potential caveat is that installation instructions are typically not included, requiring a competent individual for fitting.
| Model Part Number | 49281 |
|---|---|
| Brand | febi bilstein |
This sensor measures the temperature of the exhaust gases before the Diesel Particulate Filter (DPF) to help the vehicle's computer decide when to perform a DPF regeneration cycle.
It is compatible with VW GOLF Mk6 2.0D models from 2008 to 2013 with the CJAA engine code and a Diesel Particulate Filter (DPF).
No, installation instructions are typically not included. Professional installation by a qualified mechanic is recommended.
Symptoms can include a Check Engine Light, DPF warning lights, reduced engine power, or increased fuel consumption. A diagnostic scan is often needed to confirm sensor failure.
The part number is 49281, manufactured by Febi Bilstein.
The sensor weighs approximately 0.07 kg.
While possible for those with automotive experience, it is recommended to have it installed by a competent individual or professional mechanic due to the need for proper sealing and electrical connection.
Verify the sensor is correctly installed, securely connected, and that no exhaust leaks are present near the sensor port. Ensure the part number matches your vehicle's requirements.
This could indicate a DPF issue potentially related to incorrect temperature readings. A faulty or improperly installed sensor can disrupt DPF regeneration. Consult a mechanic for diagnosis.
The connector may need to be replaced. This requires careful soldering or crimping and heat shrinking to ensure a reliable electrical connection. Professional repair is advised.
Compatibility:
This sensor is compatible *only* with VW GOLF Mk6 2.0D models produced between 2008 and 2013, specifically those equipped with the CJAA engine code and a Diesel Particulate Filter (DPF). Always verify your vehicle's exact specifications, including engine code and DPF presence, before purchasing.
Setup & Installation:
Installation of this exhaust temperature sensor requires mechanical expertise. It is recommended that installation be performed by a qualified mechanic or a competent individual familiar with automotive exhaust systems and DPF components. The sensor typically screws into a designated port on the exhaust system before the DPF. Ensure the area is clean and free of debris before installation. The 2-pin connector should then be securely attached to the corresponding wiring harness.
Care:
As an electronic sensor, the exhaust temperature sensor requires no routine maintenance. However, it is crucial to ensure the electrical connector remains clean and free from corrosion. Avoid harsh chemical cleaners directly on the sensor or its connector. If the sensor needs replacement, it is best to do so when the exhaust system is cool.
