Lambda Sensor - NTK - 97830
Best current price£71.24from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£71.24Visit shop NGK OZA668-EE24 97830 Lambda Sensor
Visit shopeBay£71.24Visit shop All Offers
2 offers from £71.24 - £94.82
View price history by clicking the chart icon.
Lambda Sensor Pre Cat 97830 NTK Oxygen 1821362J00 OZA668EE24 Quality GuaranteedFree delivery in 1–3 days£94.82Visit shop →
Product Information
Full details
The NTK 97830 Lambda Sensor is an essential component for automotive technicians and DIY enthusiasts looking to restore precise emission control in their vehicles. By accurately monitoring exhaust oxygen levels before the catalytic converter, this 4-circuit sensor promotes optimal fuel efficiency and engine health, though users should note that improper installation or handling of the sensor tip can lead to premature failure or inaccurate readings.
All features
| Model Part Number | 97830 |
|---|---|
| Brand | NTK |
Extended Product Information
FAQs
Can I use thread sealant on the sensor tip?
No, never apply sealant, oil, or grease to the sensing element, as this will permanently ruin the sensor's ability to detect oxygen.
What does the 4-circuit design indicate?
This indicates that the sensor includes two wires for the internal heater and two wires for the sensor signal/ground, allowing for faster warm-up.
How often should the Lambda sensor be replaced?
While there is no fixed interval, sensors are typically inspected every 30,000 to 50,000 miles, or replaced if performance issues arise.
Does the wire length matter?
Yes, the 490 mm length is designed to reach the harness connector without tension; do not attempt to stretch or splice the wire if it does not fit your specific exhaust routing.
Can this sensor be used after the catalytic converter?
No, the NTK 97830 is specifically calibrated for pre-catalytic converter placement.
Troubleshooting
Check Engine light remains on after installation
Clear the diagnostic trouble codes (DTCs) using an OBD-II scanner after the new sensor is installed to reset the engine management system.
Erratic voltage readings
Check the electrical connector for corrosion or loose pins, and ensure the ground connection is secure.
Pros and Cons
Pros
- Improved fuel economy through precise mixture control
- Reduces harmful vehicle exhaust emissions
- Direct fitment for specified applications
- High-grade ceramic sensor element for longevity
Cons
- Requires specialized tools for removal and installation
- Sensitive to contamination from silicone or oil
- Must be handled carefully to avoid damaging the ceramic tip
Setup, Compatibility & Care
Installation requires a dedicated oxygen sensor socket to prevent damage to the hex nut or wire harness. Before installation, ensure the exhaust threads are clean and free of carbon buildup. Apply a small amount of anti-seize compound to the threads only, taking extreme care not to allow any lubricant to touch the sensor tip. Compatibility is verified by checking the vehicle's service manual to ensure the 4-circuit wiring pattern matches the vehicle harness. Avoid using impact wrenches during removal, as the vibration can fracture the internal ceramic components.