Best current price£11.25from eBay
Shopping.co.uk recommended and popular offers
eBay£11.25Visit shop Loctite 2700 OEM Specified High Strength Thread Lock & Sealant- Stud/ Nutlock
Visit shop5 offers from £11.25 - £16.44
View price history by clicking the chart icon.
This Loctite High Strength Thread Lock & Sealant (Green, 5g, MPN 1960972) is designed for users needing maximum efficacy in preventing loosening of threaded assemblies, especially under vibration. Its primary benefit is ensuring secure and permanent fastening in demanding applications. A potential caveat is its high strength, which requires heat for disassembly. Key features include high strength, suitability for all metals including passive substrates, and WRAS approval for water systems.
| Colour | Green |
|---|---|
| Model Part Number | 1960972 |
| Brand | Loctite |
'High Strength' indicates that once cured, the threadlocker provides a permanent bond that resists vibration and shock. Disassembly typically requires heat.
This particular product (Green, High Strength) is designed for metal applications. Using it on plastics may cause stress cracking or damage. Always check product compatibility for specific materials.
Full cure typically occurs within 24 hours at room temperature (20°C). Lower temperatures will result in a longer cure time, while higher temperatures may speed it up slightly.
WRAS approval signifies that the product meets strict standards for use in public water supplies in the UK, ensuring it does not affect water quality. This makes it safe for use in potable water systems.
To disassemble a joint secured with Loctite High Strength Threadlocker, heat is typically required. Apply localized heat to the assembly to approximately 300°C. Once heated, the fastener can usually be disassembled with hand tools.
Yes, this threadlocker works on all metals, including passive substrates like stainless steel, aluminum, and plated surfaces. For optimal cure speed on these materials, an activator might be recommended.
This product is generally recommended for thread sizes up to M20. For larger threads, consult the product's technical data sheet for specific application guidelines.
Ensure surfaces are clean and dry. For passive metals, an activator may be needed. Check ambient temperature; lower temperatures slow curing. Ensure adequate thread engagement.
Apply localized heat to the assembly (around 300°C) to break down the adhesive. Use appropriate tools for disassembly after heating.
This indicates the cap may not have been sealed properly or the product has been stored for an extended period. Discard and use a fresh tube.
Ensure surfaces were properly cleaned and degreased. Verify that the correct type of threadlocker was used for the application and that sufficient time was allowed for full cure. For passive metals, ensure an activator was used if recommended.
Setup:
Compatibility:
Care:
