Shopping.co.uk

FloPlast Waste Bend Conversion - 90 Degree x 32mm

FloPlast Waste Bend Conversion - 90 Degree x 32mm

Swivel bends are used to create a tight radius 90 degree change of direction in a waste pipe syste...

Best current price£3.68from Professional Building Supplies

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Professional Building Supplies£3.68Visit shop

Floplast Multi Fit Compression Waste Bend Conversion - 90 Degree X 32Mm

Visit shop

All Offers

4 offers from £3.68 - £10.72

View price history by clicking the chart icon.

Professional Building SuppliesFloplast Multi Fit Compression Waste Bend Conversion - 90 Degree X 32Mm
Free delivery in 1–3 days
£3.68
Visit shop
eBayFloPlast Compression Waste 90' Conversion Bend 32mm White
Free delivery in 1–3 days
£6.52
Visit shop
OnBuy.comFloplast White Compression Waste 90 Bend - 32Mm 5055149901881
Free delivery in 1–3 days
£7.66
Visit shop

Product Information

Full details

This FloPlast Waste Bend Conversion is designed for plumbers and DIY enthusiasts needing to create a tight 90-degree turn in waste pipe systems. Its key benefit is enabling a compact directional change, simplifying installations in confined spaces. A potential caveat is the specific compression joint assembly which requires careful attention to the rubber seal orientation to prevent leaks.

All features

BrandFloPlast

Extended Product Information

FAQs

What does 'M and F bends' refer to?

'M and F bends' is a common alternative name for swivel bends, referring to the male (spigot) end of the bend that inserts into the female socket of another fitting.

Can this bend be used with solvent weld systems?

No, this fitting is specifically designed for compression waste systems and is not intended for solvent weld applications.

How tight should the compression nut be?

Tighten the nut firmly by hand. Over-tightening can damage the rubber seal, while under-tightening can lead to leaks. A snug fit is generally sufficient, but refer to manufacturer guidelines if available.

What does BS EN 1451 compliance mean for this product?

BS EN 1451 is a European standard that waste fittings must meet. Compliance ensures the product has been tested for performance, safety, and compatibility within specified waste pipe systems.

Can I reuse the rubber seal after dismantling the joint?

You can reuse the rubber seal if it shows no signs of damage, cracking, or deformation. However, for guaranteed leak-free performance, replacing the seal is recommended after dismantling.

What is the purpose of the 'long tail'?

The long tail is the spigot end of the fitting designed to be inserted into the socket of another compatible waste fitting, creating a secure and sealed connection.

Troubleshooting

Leak from the compression joint

Ensure the pipe is cut square and burr-free. Verify the rubber seal is correctly seated with the dished side facing the fitting. Tighten the nut firmly. Check the rubber seal for any damage; replace if necessary.

Difficulty inserting pipe into fitting

Confirm the pipe size matches the fitting. Ensure the pipe end is clean and free from obstructions. A small amount of silicone lubricant can aid insertion, but avoid petroleum-based lubricants.

Fitting does not connect to existing pipe

Verify the type and size of the existing pipe. This fitting is designed for compression waste systems adhering to BS EN 1451. Ensure compatibility or use an appropriate adaptor if connecting to a different system.

Pros and Cons

Pros

  • Creates a tight 90-degree angle for compact installations.
  • Compression fitting allows for future adjustments or disassembly.
  • Compatible with various pipe materials and brands.
  • Manufactured to recognized industry standards.
  • Provides a clean and safe method for waste removal.

Cons

  • Assembly requires precise fitting of the rubber seal to prevent leaks.
  • May not be suitable for all types of pipe systems without appropriate adaptors.
  • Requires careful pipe preparation (cutting square, removing burrs).

Setup, Compatibility & Care

Setup:

  1. Ensure the pipe end is cut square and all burrs are removed.
  2. Unscrew the nut from the fitting.
  3. Remove the nut, washer, and rubber seal from the fitting.
  4. Slide the nut, then the washer, then the rubber seal onto the pipe. Ensure the dished side of the rubber seal faces away from the nut and towards the fitting.
  5. Insert the pipe firmly into the fitting as far as it will go.
  6. Slide the seal and washer forward into the fitting.
  7. Tighten the nut securely.

Compatibility:

  • Suitable for use with plastic and copper pipes.
  • Designed to connect waste pipes of differing materials or those made by different manufacturers within the BS EN 1451 system.
  • Available in 32mm and 40mm sizes; ensure your pipework matches the fitting size.

Care:

  • Periodically check compression joints for any signs of leakage.
  • If a joint needs to be taken apart, carefully inspect the rubber seal for damage before reassembling. Replace if damaged.
  • Clean exterior surfaces with a damp cloth. Avoid abrasive cleaners.

Price History

DatePrice
Visit shop