PTFE Thread Seal Tape - Ultratape - 12mm x 12m
Best current price£1.15from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£1.15Visit shop PTFE Thread Seal Tape 12mm x 12m 2 Pack White Plumbers Pipe WRAS Approved
Visit shopeBay£1.15Visit shop All Offers
2 offers from £1.15
View price history by clicking the chart icon.
eBayPTFE Thread Seal Tape 12mm x 12m 2 Pack White Plumbers Pipe WRAS Approved
£4.80 delivery
£1.15
Visit shop
OnBuy.comPtfe Thread Seal Tape 12Mm X 12M 2 Pack 24M Total White Plumbers Tape Wras Approved For Water Pipe Fittings And Plumbing 5027785808756
£4.80 delivery
£1.15
Visit shop
Product Information
Full details
This Ultratape PTFE Thread Seal Tape is designed for plumbers and DIY enthusiasts needing reliable leak prevention for water pipe fittings. Its primary benefit is ensuring a secure, leak-free seal in various plumbing applications, from bathrooms to kitchens. A key consideration is its specific width and length, which may require multiple wraps for larger threads. The tape is crafted from PTFE, offering excellent resistance to water, oils, and solvents, and is suitable for potable water systems.
All features
| Model Part Number | PTFE-12x12-2RLS |
|---|---|
| Brand | Ultratape |
Extended Product Information
FAQs
What is PTFE tape used for?
PTFE tape, also known as plumber's tape or thread seal tape, is used to seal threaded pipe connections. It prevents leaks by filling the gaps between the threads of two fittings.
Can this tape be used for gas lines?
This specific tape is rated for water, oils, and solvents, and is suitable for potable water. For gas lines, it is crucial to use tape specifically rated and approved for gas applications, as pressure and chemical compatibility requirements differ.
How many wraps of tape should I use?
For most standard plumbing applications, 3 to 5 wraps of tape around the male threads are recommended. The exact number can vary slightly based on thread size and type.
Does the direction of wrapping matter?
Yes, the tape should always be wrapped in a clockwise direction when looking at the end of the male thread. This ensures the tape tightens into the fitting as it is screwed together, rather than unraveling.
Is this tape safe for drinking water?
Yes, this Ultratape PTFE Thread Seal Tape is suitable for potable water systems.
How long is each roll of tape?
Each roll is 12 meters long. This pack contains two rolls, providing a total of 24 meters of tape.
What is the width of the tape?
The tape is 12mm wide, a standard size suitable for most common pipe thread applications.
Troubleshooting
Leak persists after application
Ensure tape was wrapped clockwise around the male threads. Check that sufficient wraps were applied (3-5 minimum). Verify the fitting itself is not damaged or cross-threaded.
Tape tears during application
Apply gentle, consistent tension. Avoid excessive force, especially on sharp threads. If torn, remove and reapply fresh tape.
Difficulty tightening fitting
The PTFE tape provides lubrication; if the fitting is still too tight, ensure the threads are clean and that the tape is not bunched up. Sometimes, slightly fewer wraps can help.
Pros and Cons
Pros
- Reliably stops leaks on all types of threaded connections.
- Chemically resistant, making it safe for use with water, oils, and solvents.
- Suitable for potable water applications, ensuring safety for drinking water systems.
- Provides a low-friction surface that aids in easy assembly and disassembly of fittings.
- Comes in a convenient two-pack for extended use.
Cons
- The 12mm width might be too narrow for very large or specialized pipe threads.
- Requires proper wrapping technique to ensure a watertight seal.
- Can be slightly sticky and challenging to remove cleanly if left in place for extended periods.
- Not suitable for high-pressure gas lines without specific professional verification.
Setup, Compatibility & Care
Setup:
- Ensure the pipe threads are clean and dry.
- Starting at the end of the male thread, wrap the tape clockwise around the threads. For standard fittings, 3 to 5 wraps are typically sufficient.
- Overlap each wrap slightly, ensuring the tape lies flat without significant stretching or bunching.
- The last wrap should be folded over the end of the male thread.
- Assemble the fitting by hand-tightening, then use tools for final tightening as required. The tape will help create the seal.
Compatibility:
- Compatible with most common metal and plastic pipe threads.
- Suitable for use with water (hot and cold), oils, and solvents.
- Safe for potable water systems.
Care:
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Keep the roll covered when not in use to prevent dust and debris from adhering to the tape.