SecureFix Direct Galvanised Turnbuckle Open Body - Eye Eye - 3/8" x 6"

An 'Open Body' turnbuckle has a visible threaded section, allowing you to see how far the ends are screwed into the body. This provides a visual cue for the amount of tension being applied and helps prevent over-threading.

Hot Dipped Galvanisation is a process where steel is coated in molten zinc. This provides a durable, protective layer that significantly enhances the material's resistance to rust and corrosion, making it suitable for outdoor or harsh environments.

Yes, this turnbuckle is designed to be used with wire rope, chain, and cable for tightening and tensioning applications.

The 3/8" x 6" size is particularly popular in the caravanning industry for securing awnings, tarpaulins, and cargo. It's also suitable for general-purpose tensioning of moderate loads in various settings.

Consider the load capacity required, the diameter of the wire rope, chain, or cable you are using, and the overall length needed for adjustment. This 3/8" x 6" model offers a 6-inch adjustment range.

While robust, this turnbuckle is primarily designed for tensioning and static load adjustment. Always consult load ratings and safety guidelines for lifting applications; specific lifting-rated hardware may be required.

Check for obstructions or dirt in the threads. Clean the threads thoroughly and apply a light lubricant. Ensure the attached wire rope or chain is not tangled.

Minor surface rust can occur on galvanised items. This is typically cosmetic and does not affect structural integrity. Clean with a wire brush and consider applying a protective coating if necessary.

Cease use immediately. This indicates the turnbuckle has been subjected to excessive force or is damaged. Replace the unit.

Ensure both ends of the turnbuckle are securely attached and that the wire rope, chain, or cable is properly terminated at both ends. Adjust slowly and evenly.