Ocean and Earth Surfboard Repair Resin - PU

This resin is specifically designed for PU (Polyurethane) surfboards. It is not compatible with EPS (Expanded Polystyrene) boards.

Curing time varies depending on the intensity of direct sunlight. In bright, direct sun, it can cure in minutes to a few hours. Cloudy conditions will take longer.

This resin is best suited for minor dings, chips, and small cracks. For larger or structural damage, professional repair or a more robust repair system may be necessary.

Uncured resin and tools can be cleaned easily with soap and water.

Yes, the kit includes a 28g (1oz) tube of fiberglass-impregnated resin, sandpaper for preparation, and an applicator.

Yes, the formulation is airline safe.

It means the resin will not expire or degrade over time under normal storage conditions, making it ready for use whenever you need it.

Ensure the surfboard is in direct, strong sunlight. Insufficient light or cloudy conditions will significantly slow down the curing process. Check that the solar film is applied correctly and that no ambient light is reaching the resin from the sides.

This is a characteristic of the fiber-filled resin, designed for strength. Apply firm, steady pressure to the tube. Ensure the applicator tip is clear if using it.

While the formula has an 'endless' shelf life, extreme heat or prolonged exposure to light during storage could theoretically cause issues. Ensure the cap is sealed tightly and stored in a cool, dark place.

This can happen if the resin was not exposed to sufficient UV light or if the application was too thin. Try applying a second thin coat, ensuring full sunlight exposure.