Autogem Exhaust U-Bolt Clamp - 80mm

The Autogem Exhaust U-Bolt Clamp is used to securely fasten exhaust pipes to other exhaust system components or hangers, ensuring a sealed and supported connection.

The clamp is constructed from high-quality electro-plated steel, which provides durability and resistance to corrosion.

You should measure the outer diameter of your exhaust pipe where the clamp will be fitted. The 80mm clamp is designed for pipes with an approximately 80mm outer diameter.

Yes, it can be used on various sections of the exhaust system, provided the size is correct and it is being used to secure pipes or components as intended.

The clamp is designed for exhaust systems, which operate at elevated temperatures. The electro-plated steel construction offers durability under normal exhaust system operating conditions.

Each clamp is supplied individually. You will need to purchase the required number of clamps for your specific repair.

Installation typically requires wrenches or sockets that fit the nuts on the U-bolt. The specific size will depend on the nuts provided with the clamp.

Ensure the correct size clamp (80mm) is being used for the exhaust pipe diameter. Check if the mating surface is clean and free of obstructions. Tighten the nuts evenly and securely, but do not overtighten.

The electro-plated finish offers protection, but prolonged exposure to harsh conditions can lead to surface rust. Clean the affected area and consider applying a rust-inhibiting spray. If corrosion is severe, the clamp should be replaced.

Ensure the nuts are properly threaded onto the U-bolt. Check for any damage to the threads on the U-bolt or the nuts. If threads are stripped, replacement of the clamp may be necessary.