Best current price£15.33from The Range
Shopping.co.uk recommended and popular offers
The Range£15.33Visit shop Jcp Fixings J-Fix Spin-In Glass Capsules - M10 X 80 (Box Of 10) - Brown
Visit shop19 offers from £15.33 - £35.88
View price history by clicking the chart icon.
The JCP Fixings J-Fix Spin-In Glass Capsules are designed for trade professionals and contractors who require a secure, heavy-duty anchoring solution in solid substrates. These capsules provide exceptional pull-out strength through a high-performance resin system that bonds effectively within the drilled hole, making them ideal for structural steelwork or heavy machinery installation. A primary caveat for users is that the spin-in installation method requires a rotary hammer drill and specific anchor rod insertion, necessitating precision in hole preparation to ensure the resin cures correctly and achieves maximum load capacity.
| Colour | Brown |
|---|---|
| Model Part Number | 5014196001111 |
| Brand | JCP Fixings |
These are primarily designed for solid concrete or stone. Using them in hollow brick or block requires the addition of a mesh sieve or sleeve to contain the resin.
You will need a rotary hammer drill, an appropriate SDS+ or hex adapter for the threaded rod, and a cleaning brush/blower for hole preparation.
Cure time varies based on temperature. Consult the technical packaging insert for the specific temperature/time chart provided by JCP Fixings.
Yes, once properly installed, these provide an excellent bond for overhead loads, provided the hole is cleaned perfectly and the rod is supported until the initial set occurs.
Store in their original packaging in a cool, dark, and dry area. They typically maintain effectiveness for 12 months, but always check the expiry date on the box.
Check the ambient temperature; colder conditions require significantly longer curing times. Ensure the hole was completely dry and free of oil or grease.
Verify the hole depth and diameter. Ensure the drill is set to rotation mode rather than hammer mode during the final seating process.
The hole was likely not cleaned sufficiently. Always use a wire brush and blower to remove all dust from the bottom of the hole before insertion.
For successful installation, ensure the borehole is drilled to the exact diameter required for an M20 rod. It is critical to use a stiff brush and compressed air or a vacuum to remove all drill dust, as contaminants significantly weaken the resin bond. Always check the manufacturer's data sheet for the required curing times based on current ambient temperatures, as cold weather can extend the setting process. Store the capsules in a cool, dry environment away from direct sunlight to maintain the integrity of the chemical components within the glass.
