Paint Factory Sparkle Glitter Spray Paint - Black 200ML

Clean the surface thoroughly to remove any dirt, dust, grease, or loose particles. Lightly sand glossy surfaces to improve adhesion.

For optimal results, apply multiple thin coats. Allow each coat to dry completely before applying the next, typically 15-30 minutes.

While the paint can be used outdoors, it is recommended to apply a clear sealant to protect the glitter finish from the elements and UV exposure.

Clean up overspray immediately with paint thinner or a suitable solvent while it's still wet. Once dry, it may be more difficult to remove.

Use in a well-ventilated area. Wear a respirator or mask to avoid inhaling paint fumes. Wear safety glasses to protect your eyes. Avoid contact with skin and eyes.

The paint dries to the touch in approximately 15-30 minutes. Allow at least an hour for the paint to fully cure before handling.

While it may adhere to some fabrics, it's not specifically designed for fabric. Test on a small, inconspicuous area first.

Clean the nozzle after each use. If clogged, remove the nozzle and soak it in paint thinner, then rinse with warm water. Replace the nozzle and test the spray pattern.

Apply thin, even coats, keeping the can a consistent distance from the surface. Avoid spraying too much paint in one area. If drips occur, let the paint dry completely and lightly sand the affected area before re-spraying.

Ensure the surface is properly prepared. Apply a thin base coat of compatible paint or primer before applying the glitter spray. Allow each coat to dry completely.

Apply multiple thin coats, allowing each coat to dry before applying the next. Shake the can well before each application.