Rosate 360 TF Weedkiller - 1 Litre


Currently unavailable


Currently unavailable
The Rosate 360 TF Weedkiller is designed for gardeners and landowners seeking effective control over most invasive weeds and grasses. Its key benefit is a powerful, non-hazardous glyphosate formula that ensures thorough eradication, from leaf to root. Users must apply it carefully to target weeds exclusively and avoid harming desirable plants, ensuring optimal results for clearing unwanted vegetation.
| Model Part Number | ROS36_1L+CG_#1_GD |
|---|---|
| Brand | Rosate |
Keep children and pets away from the treated area until the spray has completely dried, which usually takes a few hours. Once dry, it generally poses minimal risk.
Visible results, such as wilting and yellowing, typically appear within 7 to 14 days, depending on the weed type, weather conditions, and growth stage. Full eradication may take longer.
No, Rosate 360 TF is non-selective and will kill any plant it touches. Only use it for spot treatment in areas entirely clear of desirable plants, taking extreme care to prevent drift.
The precise mixing ratio varies depending on the weed type and application method. Always refer to the detailed instructions provided on the product label for specific dilution rates.
Store the product in its original, tightly sealed container in a cool, dry, well-ventilated area, away from direct sunlight and frost. Keep it out of reach of children and pets.
If it rains within 6 hours of application, the effectiveness of the weedkiller may be significantly reduced. For best results, ensure a minimum of 6 hours, ideally 24 hours, of dry weather after spraying.
After application, Rosate 360 TF degrades in the soil. You can generally plant new seeds or plants once the treated weeds have fully died and decayed, typically within 7-14 days, but always check the product label for specific guidance on planting intervals.
Check if the weeds were actively growing and not under stress from drought or cold. Ensure dry conditions prevailed for at least 6 hours after application. Verify the mixing ratio was correct as per the product label.
Immediately rinse the affected desired plants thoroughly with clean water to wash off the herbicide. For smaller, affected leaves, prune them off if possible. Act quickly to minimize damage.
Ensure you are using clean water at room temperature. Add the water to the sprayer first, then the weedkiller. Stir or shake the mixture thoroughly and consistently until it is uniformly dissolved.
This could indicate incomplete absorption or very resilient weeds. Re-apply the product if new growth appears, ensuring optimal application conditions (active growth, dry weather). For deep-rooted perennial weeds, multiple applications may be necessary.
Glyphosate is a systemic weedkiller and takes time to work, typically 7-14 days for initial signs, with full kill taking longer. Cool weather can slow down absorption and translocation. Be patient and avoid disturbing the treated weeds.