Bartoline Boiled Linseed Oil - 500mL

It is ideal for treating soft woods such as pine, fir, or cedar. It is not recommended for hardwoods like Oak or Teak.

For optimal results and protection, apply 2 to 3 coats, allowing 24 hours of drying time between each application.

Ensure the surface is clean, dry, and free from old paint or stains. Sand if necessary and wipe with White Spirit to remove grease. Treat mildew with Fungicidal Wash if present.

While it can be used on interior softwoods, its primary purpose is for outdoor furniture protection. Ensure good ventilation during application and drying.

Clean application tools immediately with White Spirit. Soiled cloths must be washed with soapy water and disposed of safely outdoors due to the risk of spontaneous combustion.

Allow at least 24 hours for each coat to dry before applying the next.

Linseed oil oxidizes and generates heat as it dries. Rags soaked in linseed oil can spontaneously combust if not properly handled, posing a fire risk.

Excess oil was not removed adequately after application. Wipe the surface again with a clean cloth, potentially dampened slightly with White Spirit, to remove the sticky residue. Ensure future applications have all excess removed.

The wood may not have absorbed enough oil, or not enough coats were applied. Ensure liberal application and consider applying an additional coat, allowing adequate drying time between each.

Drying times can be affected by ambient temperature and humidity. Ensure the product is applied in suitable conditions and allow the full 24 hours between coats. If still wet after extended periods, ensure excess oil was wiped off properly.