Hamilton Perfection 12" Long Pile Roller Sleeve 3 Pack

These 12" long pile roller sleeves are ideal for surfaces with light to medium textures, such as plaster, artex, or textured wallpaper on walls and ceilings.

While they can be used with some oil-based paints, they are primarily designed for and perform best with water-based paints like emulsions. Performance may vary with different paint formulations.

For water-based paints, rinse thoroughly with warm water until all paint is removed. Gently squeeze out excess water and allow to air dry completely. Avoid harsh solvents unless specified for the paint used.

This pack contains three (3) Hamilton Perfection 12" Long Pile Roller Sleeves.

They are designed to fit standard 12-inch roller frames. Always ensure the sleeve fits snugly on your frame before use.

New sleeves can sometimes shed initially. Rolling the sleeve over a clean, dry surface like cardboard or in an empty tray before applying paint can help remove loose fibers. Proper cleaning and care also minimize shedding during reuse.

Ensure the roller sleeve is new and has been 'de-fuzzed' by rolling it through a dry tray or on a piece of cardboard before painting. Thoroughly clean and dry the sleeve if it has been used previously.

Make sure the roller is loaded evenly with paint. Avoid overloading or underloading. Ensure you are applying consistent pressure and rolling technique across the surface.

Check that the surface is properly prepared and free of dust or debris. Ensure the paint is stirred thoroughly and at the correct consistency. The sleeve itself might be dirty or damaged.