Best current price£7.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.99Visit shop - Nickel Plated Mild Steel Plate61 X 14.5 X 2mm Thick + 2X 5.25mm C/sunk Holes (Pack Of 5)
Visit shop3 offers from £7.99 - £14.99
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and crafters looking for a simple way to create magnetic surfaces. The key benefit is providing a strong, flat surface for neodymium magnets to adhere to, allowing for easy hanging of items. A potential caveat is that these plates are designed as a base for magnets, not as magnets themselves. This pack contains five nickel-plated mild steel plates, each measuring 61 x 14.5 x 2mm, featuring two countersunk holes for secure mounting.
| Colour | Silver |
|---|---|
| Brand | FIRST4MAGNETS |
These plates serve as a base for magnets to attract to, effectively turning any surface they are mounted on into a magnetic surface. They can also act as striker plates for magnetic latches or as part of a magnetic circuit.
No, this pack includes five nickel-plated mild steel plates. You will need to provide your own countersunk screws suitable for your mounting surface.
These plates are designed to work optimally with neodymium magnets due to their high magnetic strength. Ferrite magnets may also work, but with less holding power.
The nickel plating offers some corrosion resistance, but prolonged outdoor exposure, especially in humid or wet conditions, may lead to rust. For extended outdoor use, consider additional protective measures or regular maintenance.
Each plate is 2mm thick.
The plates have two pre-drilled countersunk holes that allow them to be securely fastened to a surface using countersunk screws.
While possible, drilling additional holes might compromise the plate's integrity and magnetic performance. It's recommended to use the existing pre-drilled holes where feasible.
Ensure you are using a strong neodymium magnet. Verify the steel plate is clean and free of debris. Check that the magnet and plate are in direct contact without any thick material in between.
Re-tighten the countersunk screws. Ensure the pilot holes were drilled correctly and are not stripped. Consider using appropriate wall anchors if mounting to drywall.
Minor scratches are cosmetic and do not typically affect magnetic performance. Avoid using abrasive cleaning tools. If significant damage occurs, the plate may need replacement for optimal aesthetics.
Setup: To install, position the plate on your desired surface. Use a pencil to mark the center of the two countersunk holes. Drill pilot holes appropriate for your chosen screws. Secure the plate firmly using countersunk screws, ensuring they sit flush with the plate surface for a clean finish.
Compatibility: These plates are designed to work best with neodymium magnets. They are compatible with most standard countersunk screws (ensure screw head diameter is less than 5.25mm). The mild steel base ensures strong magnetic attraction.
Care: Clean the plates with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the nickel plating. For outdoor use or in humid environments, periodically check for any signs of corrosion and address them promptly.
