MKS MT-FT Mountain Bike Pedals - MK580MTFT
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The MKS MT-FT Mountain Bike Pedals (MK580MTFT) are designed for recreational riders and mountain bikers looking to replace standard, low-quality stock pedals with a reliable and durable upgrade. These pedals offer a stable platform for off-road and trail riding, providing significantly better grip and efficiency than entry-level plastic alternatives; however, they lack aggressive metal pins, which means they may not provide enough traction for extreme downhill or highly technical gravity riding.
All features
| Model Part Number | MK580MTFT |
|---|---|
| Brand | MKS |
Extended Product Information
FAQs
Do these pedals come with reflectors?
Yes, the MKS MT-FT pedals are typically equipped with integrated reflectors for improved visibility.
Can I use these pedals for road cycling?
Yes, they are suitable for road, hybrid, and mountain bikes due to their standard 9/16-inch spindle size.
What tools are needed for installation?
You will need a standard 15mm pedal wrench.
Are these pedals waterproof?
They are water-resistant and suitable for all-weather riding, though prolonged submersion should be avoided to protect the internal bearings.
Are the pins replaceable?
No, these pedals feature molded resin traction patterns rather than replaceable metal pins.
Is the left pedal reverse threaded?
Yes, as is standard with all bicycle pedals, the left pedal is reverse-threaded (removes clockwise, installs counter-clockwise).
Troubleshooting
Pedal feels tight or does not spin freely
Ensure the pedal is not cross-threaded during installation; if the issue persists after re-installation, the bearing might require adjustment.
Clicking or creaking noise while pedaling
Remove the pedals, clean the crank threads, re-apply fresh grease, and reinstall to the correct torque specification.
Pros and Cons
Pros
- Excellent value for a high-quality upgrade
- Extremely durable resin construction
- Smooth-spinning reliable bearings
- Lightweight and stable platform
- Simple, low-maintenance design
Cons
- Lack of replaceable metal pins
- Less grip compared to alloy spiked pedals
- Resin surface can be slippery when wet
- Not intended for aggressive downhill racing
Setup, Compatibility & Care
Installation
To install these pedals, you will need a 15mm pedal wrench.
- Identify the left (marked L) and right (marked R) pedals.
- Apply a small amount of grease to the threads of each pedal spindle.
- Install the right pedal by turning clockwise into the crank arm.
- Install the left pedal by turning counter-clockwise into the left crank arm.
Compatibility
These pedals use a standard 9/16-inch thread, making them compatible with the vast majority of modern mountain, hybrid, and adult bicycle cranksets.
Care & Maintenance
- Regularly inspect for debris near the spindle area.
- Clean with a damp cloth and mild soap; avoid high-pressure water sprayers directly into the bearing seals.
- Check for any lateral play annually and tighten or service as needed according to standard MKS maintenance procedures.