Shopping.co.uk

Anti Roll Bar Link - Febi - 41027

Anti Roll Bar Link - Febi - 41027

This Febi Anti Roll Bar Link, part number 41027, is a high-quality coupling rod designed for relia...

Best current price£14.94from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£14.94Visit shop

Anti Roll Bar Link Rear Left or Right 41027 Febi Stabiliser Drop Link 52088319

Visit shop

All Offers

10 offers from £14.94 - £28.02

View price history by clicking the chart icon.

eBayAnti Roll Bar Link Rear Left or Right 41027 Febi Stabiliser Drop Link 52088319
Free delivery in 1–3 days
£14.94
Visit shop

Product Information

Full details

The Febi Anti Roll Bar Link (41027) is designed for Jeep Grand Cherokee Mk2 owners looking for a reliable, OEM-standard replacement for their vehicle's rear suspension system. This component provides the critical link between the anti-roll bar and the suspension, effectively reducing body roll and improving handling stability during cornering. While it is engineered for a precise fit, users must ensure the 222 mm length matches their specific vehicle configuration and should always consult their service manual for proper installation procedures.

All features

Model Part Number41027
BrandFebi

Extended Product Information

FAQs

Does this part fit both sides of the rear axle?

Yes, the Febi 41027 is designed to be compatible with both the rear left and rear right positions.

Is the 222 mm length standard for my vehicle?

Yes, this length is specified for the Jeep Grand Cherokee Mk2 (1999-2005) models.

Should I replace these in pairs?

It is highly recommended to replace anti-roll bar links in pairs to ensure even suspension wear and predictable handling.

Do I need an alignment after replacing this part?

While replacing a sway bar link generally does not affect wheel alignment, it is good practice to ensure the vehicle sits level after the installation.

What is the primary sign that I need to replace my roll bar links?

A rattling, clunking, or knocking sound coming from the rear suspension when driving over uneven surfaces or bumps is the most common symptom.

Troubleshooting

Clunking noise persists after installation

Check that the mounting nuts are tightened to the correct torque specification and ensure the link is not binding against other suspension parts.

Difficulty removing old link

Use a high-quality penetrating oil and allow it to soak for at least 15 minutes to break down rust on the threads.

Pros and Cons

Pros

  • Meets or exceeds OEM quality standards
  • Compatible with both left and right rear positions
  • Precise 222 mm measurement ensures correct fitment
  • Restores original handling characteristics

Cons

  • Specific to Jeep Grand Cherokee Mk2 models only
  • Requires mechanical knowledge for safe installation
  • Hardware and bushings should be inspected for wear when replacing

Setup, Compatibility & Care

This component is specifically engineered for the Jeep Grand Cherokee Mk2 (1999-2005). Before beginning installation, ensure the vehicle is safely raised and supported on jack stands.

  1. Preparation: Remove the wheel to gain clear access to the rear suspension arm.
  2. Removal: Use penetrating oil on the old nuts if they are corroded. Use a wrench to hold the stud and a socket to remove the nuts.
  3. Installation: Position the new 222 mm link, ensuring the rubber bushings are seated correctly.
  4. Torque: Always tighten fasteners to the manufacturer’s specified torque settings as listed in your Jeep service manual.
  5. Care: Inspect the rubber dust boots on the joints annually for tears or dry rot. If the boot is compromised, road debris will quickly destroy the internal joint.

Price History

DatePrice
Visit shop