Sliding Patio Door Handle Set with Key Cylinder and Mortise Lock - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This HuisZon Sliding Patio Door Handle Set is designed for homeowners needing to replace damaged or old door hardware on wood, aluminum, or vinyl sliding doors. Its key benefit is providing enhanced security and ease of use with a complete, economical kit that includes an exterior pull with a key cylinder for locking from the outside. A potential caveat is that the 45° mortise latch may not be compatible with all door types without minor adjustments.
All features
| Colour | White |
|---|---|
| Model Part Number | B094HYMQFJ |
| Brand | HuisZon |
Extended Product Information
FAQs
What materials are compatible with this handle set?
This set is designed for sliding patio doors made from wood, aluminum, and vinyl.
Can this handle be used on a door that opens to the left?
Yes, the handle set features a standard reversible, non-handed design and can be used on both left and right-handed sliding doors.
Does the key lock the door from both sides?
No, the key cylinder is located on the exterior pull, allowing you to lock the door from the outside. The interior handle operates the thumb latch.
What is included in the complete set?
The set includes an interior handle, an exterior pull with a key cylinder, a mortise lock, a thumb latch, and six screws in three different sizes.
Is professional installation required?
No, the set is designed for easy DIY installation and typically requires only basic tools.
What is the angle of the mortise latch?
The mortise latch has a 45° angle. It's recommended to check if this matches your door's existing cutout.
How do I clean the handle set?
Wipe clean with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
Troubleshooting
Handle is loose after installation
Ensure all mounting screws are fully tightened. Check if the correct screw length was used for your door thickness.
Lock does not engage properly
Verify that the 45° mortise latch is correctly aligned with the strike plate on the door frame and that the strike plate is properly adjusted.
Key cylinder is stiff or difficult to turn
Apply a small amount of graphite lubricant or a silicone-based spray designed for locks. Avoid using oil-based lubricants which can attract dust.
Exterior pull does not align with interior handle
Re-check that the interior and exterior components are oriented correctly and that the mortise lock is properly seated within the door edge.
Pros and Cons
Pros
- Economical and complete replacement set
- Exterior key lock provides enhanced security
- Reversible design fits left and right-handed doors
- Suitable for various door materials (wood, aluminum, vinyl)
- Simple DIY installation process
Cons
- Mortise latch angle (45°) may require verification for specific door cutouts
- Key cylinder is only on the exterior pull
- Material of interior handle not specified for extreme durability comparison
- Weight (1.19 lbs) suggests a standard build, not heavy-duty
Setup, Compatibility & Care Instructions
Setup:
- Remove the screws securing your old door handle.
- If necessary, remove the old mortise lock mechanism from the door edge.
- Insert the new 45° mortise latch into the door's edge cutout.
- Align the interior handle and exterior pull with the pre-drilled holes on the door face.
- Insert the provided screws (use the correct size for your door thickness) and tighten them to secure the handles.
Compatibility:
- Designed for standard sliding patio doors made of wood, aluminum, and vinyl.
- The mortise lock has a 45° angle; verify this matches your door's existing cutout or can be adapted.
- The non-handed design fits left and right-handed doors.
Care:
- Clean the handle set with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Periodically check screw tightness and ensure smooth latch operation.