Bison Rear View Car Mirror Adhesive - 2ml Syringe

The adhesive takes approximately 24 hours to cure completely.

Yes, it can be used on tinted windows, provided the tint is properly adhered and not easily damaged.

Yes, the adhesive is waterproof once fully cured.

Wash the affected area immediately with soap and water. If irritation persists, consult a physician.

Reseal the syringe cap tightly and store it in a cool, dry place. The remaining adhesive can be used for future applications.

Carefully detach the mirror (if possible before it fully cures). Clean the surfaces and reapply the adhesive, ensuring proper alignment before allowing it to cure.

The adhesive is designed for standard car mirrors. Ensure the mirror's mounting surface is compatible.

If stored properly, the adhesive has a shelf life of approximately one year from the manufacturing date.

Ensure surfaces were properly cleaned and dried before applying the adhesive. Reapply adhesive following the instructions, and ensure it cures for a full 24 hours without disturbance.

Make sure the adhesive is fresh (not expired). Verify that the application surface is free of any residue. Apply a thicker layer of the adhesive.

If excess adhesive is visible, carefully remove it with a clean cloth before it dries. Be careful not to dislodge the mirror. Isopropyl alcohol can help remove residue.