Round LED Plinth Light Kit - Warm White - 10 Pack - Loops
Illuminate your spaces with this 10-Pack Round LED Plinth Light Kit, perfect for kitchens, bathroo...Illuminate your spaces with this 10-Pack Round LED Plinth Light Kit, perfect for kitchens, bathrooms, and more. Each kit includes 10 warm white spotlights and a 12V DC driver, converting mains power for energy efficiency. Key features include a warm white light color (3000-3500 Kelvin), 0.2W per light, 1.5m cable length, and an IP67 waterproof rating ideal for various applications (driver is not outdoor safe). These lights enhance the look of skirting boards, kickboards, and panels, offering a modern lighting solution with a stylish stainless steel finish. They are environmentally friendly and cost-effective, maintaining 70% brightness after years of use. Lights can be surface or recessed mounted (28mm cut-out required, 10mm deep). Each light has a 2m cable that plugs into the supplied driver, which connects to mains power and can be controlled by a light switch. Extension cables are available separately.
This guide helps you understand and use the Loops Round LED Plinth Light Kit. Ideal for anyone looking to enhance their home's ambiance with energy-efficient lighting, this kit offers warm white illumination suitable for kitchens, bathrooms, and more. Note that the included driver is not suitable for outdoor use.
All features
Brand
Loops
Extended Product Information
FAQs
Can these lights be used outdoors?
The lights themselves are waterproof (IP67), but the driver is not. Therefore, they should not be used outdoors.
What is the lifespan of the LED lights?
LED lights are known for their longevity and can maintain 70% brightness for many years.
What is the color temperature of the warm white light?
The color temperature is 3000-3500 Kelvin.
Are extension cables available?
Yes, extension cables are available separately to increase the distance between the lights and the driver.
What size cut-out is needed for recessed mounting?
A 28mm cut-out with a depth of 10mm is required.
Can the lights be dimmed?
The lights are not designed to be dimmed without additional dimming components.
What is the cable length of each light?
Each light has a 1.5m cable. The cable from the lights to the driver is 2m.
Troubleshooting
Lights are not turning on.
Check the power connection to the driver. Ensure the driver is plugged in correctly and the outlet is working. Check the light switch if connected. If these are working, verify the light cables are securely connected to the driver.
Lights are flickering.
Check all connections for any loose wires. Ensure that the driver is receiving a stable power supply. If using a light switch, verify it's compatible.
Some lights are dimmer than others.
Ensure all lights are properly connected to the driver. Check for any damage to the cables. Consider replacing the affected lights.
Pros and Cons
Pros
Energy-efficient LED technology.
Waterproof design allows for versatile placement.
Easy to install with both surface and recessed mounting options.
Stylish stainless steel finish.
Includes a 12V DC driver for safe operation.
Cons
Driver is not suitable for outdoor use.
Requires a 28mm cut-out for recessed installation.
Additional extension cables may be needed for certain installations.
Setup, Compatibility & Care
Setup Instructions:
Preparation: Plan the layout and measure the areas where you intend to install the lights.
Mounting:
Surface Mounting: Secure the lights to the surface using appropriate screws or adhesive.
Recessed Mounting: Drill a 28mm cut-out and 10mm deep hole for each light.
Wiring: Connect the 2m cable of each light to the supplied 12V DC driver.
Driver Connection: Connect the driver to a mains power outlet or a light switch.
Testing: Turn on the lights to ensure they function correctly.
Compatibility:
The lights are compatible with a 12V DC power source, provided by the included driver.
Ensure the power outlet is correctly wired and within the driver's voltage range.
Care Instructions:
Clean the lights with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
Ensure the driver is kept dry and protected from moisture, as it is not waterproof.